Pusat pusingan dan pengilangan CNCMazak
Integrex e-500 HS U1500
Data mesin
- Nama mesin:
- Pusat pusingan dan pengilangan CNC
- Pengeluar:
- Mazak
- Model:
- Integrex e-500 HS U1500
- Tahun pembuatan:
- 2005
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 60,683 h
Butiran teknikal
- Panjang pemesinan bubut:
- 1,524 mm
- Diameter pusingan:
- 820 mm
- Kelajuan gelendong (maks.):
- 3,300 rpm
- Gerakan pantas paksi X:
- 40 m/min
- Kelajuan gelendong penggilingan (maks.):
- 10,000 rpm
penyediaan
- Lokasi:
- Rheinland-Pfalz, Jerman
– Jarak: lebih kurang 9,943 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
The following work has been carried out on the machine:
Repair/overhaul of the gearbox of the B-axis (2025)
complete maintenance (2025)
tool magazine renewed (2025)
replacement of the linear guides of the X + Y axis (2024)
renewal of the ball screws X + Y (2024)
repair of milling spindle (2024)
Including approximately 120 tools SK 50
TECHNICAL DETAILS
Turning length: 1,524 mm
Turning diameter: 820 mm
Travel X-axis: 870 mm
Travel Y-axis: 500 mm
Travel Z-axis: 1,598 mm
Main spindle
Spindle speed (max.): 3,300 rpm
Drive power main spindle: 30 kW / 22 kW
Max. torque main spindle: 588 Nm
Spindle nose main spindle: A2-11"
Spindle bore: 104 mm
Indexing: 0.0001
Counter spindle
Spindle speed (max.): 3,300 rpm
Drive power counter spindle: 30 kW / 22 kW
Max. torque counter spindle: 588 Nm
Spindle nose counter spindle: A2-11"
Indexing: 0.0001
Milling spindle
Drive power milling spindle: 37 kW
Max. torque milling spindle: 260 Nm
Milling spindle speed range: 0-10,000 rpm
Rapid traverse X-axis: 40 m/min
Rapid traverse Y-axis: 40 m/min
Rapid traverse Z-axis: 40 m/min
MACHINE DETAILS
Control: Mazatrol 640M PRO
Tool holder: SK50
Number of tool positions: 120
Operating voltage: 400 V / 50 Hz
Connected load: 104 kVA
Required installation area (L x W): 7 x 3.5 m
Operating hours: 60,683 h
EQUIPMENT
approx. 120 tools SK 50
Speed infinitely adjustable
Tool magazine 120 places
High-pressure coolant 70 bar
Renishaw probe (new in 2025)
Laser measuring system for rotating tools
Interface set
Air / water cooling through the spindle
Overload monitoring system
Chip conveyor Mayfran Consep 2000
Quick-change tool holder SMW
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22104713
- Nombor rujukan:
- AUC-2606138
- Kemas kini:
- terakhir pada 02.07.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Thurmaston DoosanPuma 2600SY II
Jerman LIEBHERRWSC 1200
Thurmaston MikronHPM 800U HD
Itali MazakQT Nexus 350 II M
Airdrie DOOSANPuma 2600L
Wald DECKELFP 2 NC
Jerman LIEBHERRLC300
Reiden GoodwayGS-2800 M
Jerman KAPPKX 160 Twin
Jerman Gleason-PfauterGP 200S
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.