Pelarik CNCMazak
Integrex 200 III ST
Data mesin
- Nama mesin:
- Pelarik CNC
- Pengeluar:
- Mazak
- Model:
- Integrex 200 III ST
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Diameter pusingan:
- 660 mm
- Lubang gelendong:
- 76 mm
- Kelajuan gelendong (maks.):
- 5,000 rpm
- Model pengawal:
- MAZATROL Fusion 640 MT
- Tork gelendong (maksimum):
- 349 Nm
penyediaan
- Lokasi:
- Středočeský kraj, Republik Czech
– Jarak: lebih kurang 9,509 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
TECHNICAL DETAILS
Maximum turning diameter: 660 mm
Main spindle
Speed range: 35–5,000 rpm
Power (10 min / continuous operation): 22 / 15 kW
Maximum torque: 349 Nm
Spindle bore: 76 mm
Chuck diameter: 210 mm
C-axis indexing: 0.0001°
Sub-spindle
Speed range: 35–5,000 rpm
Power (10 min / continuous operation): 18.5 / 15 kW
Maximum torque: 326 Nm
Chuck diameter: 210 mm
C-axis indexing: 0.0001°
Cooling
Coolant tank volume: 300 l
Pump capacity: 20 l/min
Pump pressure: 5 bar
Compressed air requirement: 5 bar, 500 l/min
MACHINE DETAILS
Control model: MAZATROL Fusion 640 MT
Total power consumption: 66 kVA
Operating voltage: 400 V / 50 Hz
EQUIPMENT
Technical documentation
Chip conveyor with cooling system
20-tool magazine
B-axis (positioning in 0.001° increments)
C-axis
Y-axis
Angular positioning of the sub-spindle
Synchronization of main and sub-spindle
Tool setting system (Tool Eye)
Interlock for the front door
Complete cooling system
Interface for IC memory card
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22200462
- Nombor rujukan:
- AUC-2606220
- Kemas kini:
- terakhir pada 24.06.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Středočeský kraj COLCHESTERAlpha 1400XS
Středočeský kraj HURCOTM 10
Republik Czech MazakIntegrex 200 III ST
Niš MazakIntegrex 200 III-ST
Ardennes MAZAKINTEGREX 200-III ST
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.