Pusat pemesinan menegakMatsuura
MAM72-25V PC-2
Data mesin
- Nama mesin:
- Pusat pemesinan menegak
- Pengeluar:
- Matsuura
- Model:
- MAM72-25V PC-2
- Tahun pembuatan:
- 2007
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 66,963 h
Butiran teknikal
- Jarak gerakan paksi X:
- 550 mm
- Jarak perjalanan paksi-Y:
- 410 mm
- Jarak gerakan paksi Z:
- 450 mm
- Beban meja:
- 40 kg
- Kelajuan putaran (maks.):
- 15,000 rpm
penyediaan
- Lokasi:
- Hessen, Jerman
– Jarak: lebih kurang 9,922 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€1,000.00 (wajib)
percuma
Penerangan
TECHNICAL DETAILS
B Axis: +110° to -110°
C Axis: 360°
Table Indexing B and C Axes: 0.001°
Workpiece
Max. Workpiece Size: Ø 250 × Height 250 mm
Max. Table Load: 40 kg
Pallet System
Pallet Size: Ø 130 mm
Max. Workpiece Size on Pallet: Ø 250 × Height 250 mm
Max. Pallet Load: 40 kg
Pallet Interface: Capto C6
Spindle
Spindle Speed Range (standard): 50 - 15,000 rpm
Spindle Taper: BT 40 JIS B 6339 Big+
Spindle Motor Power with FANUC Drive: 7.5 / 5.5 kW
Max. Torque: 65.1 Nm at 1,100 rpm
Rapid Traverse and Feed Rates
Rapid Traverse X, Y, Z Axis: 50,000 mm/min
Rapid Traverse B Axis: 30 rpm
Rapid Traverse C Axis: 50 rpm
Feed Rate X, Y, Z Axis: 1…50,000 mm/min
Feed B Axis: 30 rpm
Feed C Axis: 50 rpm
Tool Changer
Max. Tool Weight: 10 kg
Max. Tool Diameter (all positions occupied): Ø96 mm
Max. Tool Diameter (adjacent positions free): Ø150 mm
Max. Tool Length: 300 mm
Guides
Axis Guides: Roller Guides
Lubrication: Permanent grease lubrication
Ball Screws X, Y, Z Axis Ø: 36 mm
Pitch: 16 mm
Axis Drives
X, Y, Z Axis Power: 4.5 / 4.5 / 5.5 kW
B, C Axis Power: 4.5 / 2.5 kW
Axial Force X, Y, Z Axis: kN
MACHINE DETAILS
Control: MATSUURA G-Tech 30i (FANUC 30i MA)
Serial Number: SN17224
Weight & Dimensions
Standard Machine Weight: 7,800 kg
Machine with PC-2: 8,600 kg
Machine Height Above Floor: 2,705 mm
Width: 2,281 mm
Depth: 3,665 mm
Electrical Data
Total Connected Load (Standard machine): 32 kVA
Supply Voltage: 3 x 400 V, 50 Hz
Compressed Air Connection: 5.5-9.5 bar
EQUIPMENT
5-axis simultaneous control
Expanded tool magazine capacity to 40 tool positions
Pallet changer with 2 pallets, 130 mm diameter
Direct measuring system (Heidenhain) for X, Y, and Z axes with seal air supplied
KNOLL cooling system:
1 scraper belt or hinge belt chip conveyor with lift pump and chip discharge to the operator side (Type: 500 K-1/10, year of manufacture 2010)
1 coolant supply through the spindle with coolant pump KTS25-50T, output 31 l/min at 70 bar, 5.5 kW, pressure switchable in 3 stages
1 external cooling with coolant pump, output 100 l/min at 1.4 bar
1 coolant flushing with coolant pump, output 100 l/min at 1.4 bar
1 compact filter KF200, filter capacity 200 l/min
2 spiral auger conveyors in the machine
RENISHAW OMP 60 measuring system for automatic workpiece zero-point setting and measuring via the tool chan
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A19524101
- Nombor rujukan:
- AUC-2507043
- Kemas kini:
- terakhir pada 14.08.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Schweiz MATSUURAMAM72-25V PC2
Shildon BrotherTC 32B QT
Kanada GLEASON- PFAUTER100 S
Sonnenbühl DMU80 P hi-dyn
Jünkerath GLEASON100S
Butzbach ReishauerRZ303
Butzbach LiebherrLS200F
Jerman REISHAUERRZ362A
Chemnitz WMW HECKERTSK 50
Sweden LiebherrL3002
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.