Pusat pemesinan menegakMATSUURA
MAM 72-25 V
Data asas
- Nama mesin:
- Pusat pemesinan menegak
- Pengeluar:
- MATSUURA
- Model:
- MAM 72-25 V
- Nombor mesin:
- 17405
- Tahun pembuatan:
- 2007
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
Spindel
Magazin alat
Bahan/produk boleh diproses
Spesifikasi gandar
penyediaan
- Lokasi:
- Baden-Württemberg, Jerman
– Jarak: lebih kurang 9,831 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€1,500.00 (wajib)
percuma
Penerangan
No reserve price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
X-axis travel: 550 mm
Y-axis travel: 410 mm
Z-axis travel: 450 mm
B-axis travel: -110 to +110°
C-axis travel: 360°
Distance from pallet surface to spindle centerline: -20 to 430 mm
Distance from B-axis center to spindle centerline: -40 to 410 mm
Distance from B-axis center to spindle centerline: -20 mm
Distance from pallet centerline to Z zero point: 265 mm
Distance from pallet centerline to Y zero point: 180 mm
Pallet
Working area on pallet: Ø 130 mm
Pallet load capacity: 40 kg
Max. workpiece size: Ø 250 × 250 mm
Pallet clamping surface: 4 × M12 × 1.75
Distance from pallet bottom to pallet surface: 970 mm
Pallet indexing B-/C-axis: 0.001° / 0.001°
Pallet change time B-axis: 1.2 s/90°
Pallet change time C-axis: 0.9 s/90°
Pallet change time C-axis: 1.2 s/180°
Pallet change time C-axis: 1.4 s/270°
Pallet rotary torque B-axis: 1,070 Nm
Pallet rotary torque C-axis: 192 Nm
Pallet braking torque B-axis: 1,112 Nm
Pallet braking torque C-axis: 500 Nm
Spindle
Spindle speed: 50 to 15,000 rpm
Spindle speed change: 5-digit direct S-command
Tool holder: SK 40
Spindle taper: 7/24, Taper No. 40
Spindle bearing inner diameter: 70 mm
Max. spindle torque: 65.1 Nm at 1,100 rpm
Spindle air purge: Standard
Spindle orientation: Standard
Tool clamping force: 7.0 kN
Tool changer
Tool magazine capacity: 240 positions
Tool shank: JIS B 6339, tool pocket 40T
Pull stud type: JIS B 6339, pull stud 40P
Max. tool diameter: 80 mm
Max. tool diameter with adjacent stations free: 150 mm
Max. tool length: 300 mm
Max. tool weight: 10 kg
Tool selection: Fixed address system
Tool changer arm: W-gripper type
Feed rates
Rapid traverse X-/Y-/Z-axis: 50 m/min
Rapid traverse B-axis: 30 min⁻¹
Rapid traverse C-axis: 50 min⁻¹
Feed X-/Y-/Z-axis: 1 to 50 m/min
Feed B-axis: 30 min⁻¹
Feed C-axis: 50 min⁻¹
Rapid traverse acceleration X-/Y-/Z-axis: 0.6 G
Rapid traverse acceleration B-/C-axis: 2,500 / 2,000 °/s²
Max. acceleration for cutting feed X-/Y-/Z-axis: 0.4 G
Max. acceleration for cutting feed B-/C-axis: 2,000 / 4,000 °/s²
Jog feed X-/Y-/Z-axis: 0 to 4,000 mm/min
Jog feed B-/C-axis: 0 to 11.11 min⁻¹
Min. movement increment X-/Y-/Z-axis: 0.001 mm<
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22804480
- Nombor rujukan:
- AUC-2609227
- Kemas kini:
- terakhir pada 30.09.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Baden-Württemberg MatsuuraMAM72-25V
Schweiz MATSUURAMAM72-25V PC2
Nashik MatsuuraMAM72-25V
Ústecký kraj MatsuuraMAM 72 - 25V
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.