Pelarik tengah dan pelarik gelendongMATRA
MD40
Data asas
- Nama mesin:
- Pelarik tengah dan pelarik gelendong
- Pengeluar:
- MATRA
- Model:
- MD40
- Nombor mesin:
- 3045
- Keadaan:
- terpakai
penyediaan
- Lokasi:
- Baden-Württemberg, Jerman
– Jarak: lebih kurang 9,837 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€400.00 (wajib)
percuma
Penerangan
No reserve price – guaranteed sale to the highest bidder!
Loading: 01.12. to 10.12.
TECHNICAL DETAILS
General Information
Manufacturer: Matra
Model: MD40
Machine type: Engine and lead screw lathe
Machine weight: approx. 4.8 t
Work Area
Swing diameter over bed: 870 mm
Swing diameter over support: 520 mm
Turning length: 2,100 mm
Swing diameter in gap: 1,080 mm
Gap length: 430 mm
Spindle
Number of spindle speeds: 24
Spindle speed range: 8–1,000 rpm
Spindle bore: 103 mm
Cross Slide and Travels
X axis: 1,830 mm
X² axis: 160 mm
Y axis: 415 mm
Cross slide travel: 450 mm
Top slide travel: 160 mm
Feeds
Longitudinal feed steps: 104
Longitudinal feed: 0.1–61.6 mm/rev
Longitudinal feed: 0.0038–2 19/64 in/rev
Cross feed steps: 104
Cross slide feed: 0.3–18.4 mm/rev
Cross feed: 0.0012–47/64 in/rev
Rapid traverse longitudinal: 5,140 mm/min
Rapid traverse cross: 2,570 mm/min
Thread Cutting
Thread pitches: 72 types
Metric thread pitch: 0.5–240 mm
Inch thread: 60–1/8 TPI
Module thread: 0.125–60 mm
Tailstock
Tailstock transverse offset from center: 10 mm
Quill taper: MT 6
Quill stroke: 280 mm
Electrical Data
Frequency: 50 Hz
Operating voltage: 380 V
Control voltage: 220 V
Rated current: 30 A
Protection: 50 A
Total power requirement: 13 kW
Dimensions
Space requirement: approx. 4.1 × 1.5 × 1.9 m
EQUIPMENT
Original Forkardt F400 3-jaw chuck
Removable gap bridge
Original MiniWizard 2-axis digital readout
3 glass scales
Multifix quick-change toolpost
Swiveling spindle guard with safety switch
2 emergency stop buttons
Lockable main switch
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A23091901
- Nombor rujukan:
- AUC-2610322
- Kemas kini:
- terakhir pada 23.10.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Baden-Württemberg PBRTM450/2000
Baden-Württemberg ZVLBRH-20 A
Baden-Württemberg RAS76.61
Baden-Württemberg DECKELFP 5 NC
Baden-Württemberg MAES 100 SZ
Baden-Württemberg KUNZMANNWF 7 - TNC 355
Baden-Württemberg FASTI271-20-2,5
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.