Vertical machining center

Makino D200Z

MAKINO D200Z
Makino Professional 6 (FANUC FS31i-B)
Professional 6 Version

X-axis 350 mm
Y-axis 300 mm
Z-axis 250 mm
B-axis (swivel range) 180° (0° – 180°)
C-axis (rotation angle) 360° continuous
Distance table surface – spindle center 160 – 410 mm
Table Max. load capacity 75 kg
Max. workpiece size (Ø × H) 300 mm × 210 mm (with restrictions)
Chuck EROWA

Speed range 100 – 30,000 min⁻¹
Drive power (25 % ED / continuous) 15 kW / 11 kW
Torque (25 % ED / continuous) 23.8 Nm / 21 Nm
Interface HSK-E50

Positioning accuracy X/Y/Z (with linear scales) ± 0.0015 mm
Repeatability X/Y/Z ± 0.0010 mm
Positioning accuracy B/C-axis ± 2.0 s
Repeatability B-axis / C-axis ± 2.0 s / ± 1.0 s
Tolerances measured at the manufacturer’s plant with appropriate foundation and daily temperature fluctuations of max. ± 1 °C.

Capacity 20 tools
Max. tool weight 3 kg
Max. tool dimensions Ø 50 mm (without restrictions) / Ø 80 mm (with restrictions)
Max. tool length 200 mm
Interface HSK-E50
Connected load 40 kVA
Compressed air
5 – 8 bar, max. 500 l/min
2,300 × 1,868 × 3,030 mm 4,600 kg

Spindle with 30,000 rpm, HSK-E50 interface
Rigid tapping
Table with EROWA / System 3R chuck (DD motor), high-precision bearings
Linear scales (X, Y, Z)
Tool changer with 20 pockets (ATC 20), HSK interface
Collision Safeguard (CSG)
Robot door, loader interface (A-type)
Chip conveyor with drum filter and downstream cyclone filter
Flushing channel, air blower, coolant nozzles at spindle nose
Fully enclosed work area, safety-guarded operator door
Portable hand pendant
Super GI.5 control, High-speed smooth TCP, GI-Smoothing
Tool center point control (G43.4, G43.5) for simultaneous 5-axis machining
3-dimensional cutter compensation, tilted working plane
Dynamic fixture compensation for rotary table, VP control
Adaptive control (AC Control), energy saving function
2 GB part program memory, Data Center 1 GB, 1,000 programs
Tool compensation memory: 400 offsets, type C
54 workpiece coordinate systems (6 + 48)
User macro programming with 1,100 variables
MRDF sensor (Machine Relocation Detection Function)

EROWA Power Chuck
Loader interface (A-type) instead of (L-type)
Coolant temperature control unit (constant coolant temperature, with heating)
Bwode Ah D Twepfx Apmow
Workpiece wash gun (operator side)
Coolant shower
Connection for oil mist extraction (Ø 125 mm)
Air dryer
Tool length measurement by BLUM laser, incl. tool breakage detection
3-coordinate touch probe Blum TC62 (measuring uncertainty approx. 0.005 mm, radio transmission, 14 automatic measuring cycles, incl. gauge block for C-axis pivot point)
i-Set-up (additional operator panel for easy workpiece alignment)
MML interface (fast Ethernet card)
Network integration
Remote diagnostics setup (VNC/EDM viewer, installation and training)

OPC UA interface for Professional 6 (35 readable tags)
Tool retract and re-approach function
3D model of the working area