Ballenauflöser

mütek

Overview - of the various variants
*not every item is required:

Optional:
- Bale opener MHB from €24,990 net
- Straw mill MHZ from €7,980 net
- Special hopper €970 net
- Cyclone from €3,750 net
- Sheet metal silo demonstrator with discharge (only shown schematically in the picture)
*optional, if you want to feed it with a wheel loader
Individual price net from €14,750 - demonstrator

- Dust extraction auger - length approx. 4 m
Four sieves are mounted on the underside, which are vacuumed.
Individual price net from: €9,750

- Suction parts / hoses as a package €945 net
- Control system for the entire system
Individual price net: €2,750

- Demonstrator dust extraction unit MMJET 160, with cleaning
Connection 160,
Fan 2.2kW
Air flow 1850m³ /400 V
Automatic compressed air cleaning
Individual price net from: €6,950

- Bale press B 400
Dwodpsff Sbiofx Ab Dsd
Bales approx. 400x400x800 (height adjustable)
Up to 30 bales per hour with +/- 20 kg
from €67,550 net

*A reference system (baler) is located in postal code: 64579 Gernsheim

Technical data:
Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request)
Weight of the bale +/- 20 KG (material-dependent)
Performance: approx. 30 bales per hour
Hopper capacity approx. 0.7m³
Level sensors for min./max. fill level in the hopper
Hydraulic pre-compressor
Hydraulic press ram
Hydraulic unit, valve block with oil tank
Pump 18.5 kW / 50 liters
Rollers in the press channel for easy bale discharge
Dimensions (L x W x H) 3105x2830x2455 mm
Weight approx. 1500 KG

mütek balers / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded Miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation.
The baler compresses the material fed into the hopper without the addition of binding agents by means of hydraulic pressure and packages the material in plastic sacks. The volume of the material can be significantly reduced with the baler. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry matter.
The hopper of the mütek baler can be loaded automatically or by hand and has a volume of approx. 0.7 m³. Containers with a larger volume or with an integrated extraction and filter system as a complete disposal unit are also available. In addition to the automatic filling via dust extractor, mütek also offers filling by means of conveyor screws. In both variants, automatic dust extraction is possible.
mütek balers are equipped with a control cabinet for operation.
In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request.

The following advantages result from the production of bales:
- Simple and safe storage
- No loose dust
- Minimization of storage volume
- Low transport volume

*Requirements for the raw material:
- dry (max. 30% dry matter)
- maximum 35 mm long

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.