Rak kekuda palet rak kekudaLink 51 Boltless XL/ 2.700 mm/
K 80 x 45 mm/ Stufentraverse
Rak kekuda palet rak kekuda
Link 51 Boltless XL/ 2.700 mm/
K 80 x 45 mm/ Stufentraverse
harga tetap ditambah cukai perkhidmatan
€34
Keadaan
Terpakai
Lokasi
Neukamperfehn 

Gambar menunjukkan
Tunjukkan peta
Data mesin
- Nama mesin:
- Rak kekuda palet rak kekuda
- pengeluar:
- Link 51 Boltless XL/ 2.700 mm/
- Keadaan:
- baik (terpakai)
Harga & Lokasi
harga tetap ditambah cukai perkhidmatan
€34
- Lokasi:
- Hauptstraße 157, 26835 Neukamperfehn, DE
Hubungi
Butiran tawaran
- ID iklan:
- A8977874
- kemas kini:
- terakhir pada 06.01.2025
Penerangan
Technical data for the pallet rack traverse:
Racking system: Link 51
Hnjdpfx Afskv Urwj Esu
Type: Boltless XL
Included in delivery are:
01x pallet rack traverse, used
Material color: yellow
box profile: 80|53 x 45|25 mm
Type of truss: 4 BST
Step profile: H 28 mm, W 20 mm
agraffe: 4 HK (hooks)
clear width: 2.700 mm
max. load per truss pair
900 kg, with evenly distributed load
02x safety pins, used
execution: compl. galvanized
To secure the longitudinal beams
against unintentional lifting out
Further information about the pallet rack traverse:
The traverse type 4 BST is used to insert chipboards, steel panels or similar, which then finish +/- flush with the upper edge of the shelf traverse.
This means that there is no loss of height, and the front of the step crossbar protects the shelves or the insertion segments from damage.
The crossbars are not used for pallet storage, but as picking levels; i.e. storage of cartons, small parts or similar.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Racking system: Link 51
Hnjdpfx Afskv Urwj Esu
Type: Boltless XL
Included in delivery are:
01x pallet rack traverse, used
Material color: yellow
box profile: 80|53 x 45|25 mm
Type of truss: 4 BST
Step profile: H 28 mm, W 20 mm
agraffe: 4 HK (hooks)
clear width: 2.700 mm
max. load per truss pair
900 kg, with evenly distributed load
02x safety pins, used
execution: compl. galvanized
To secure the longitudinal beams
against unintentional lifting out
Further information about the pallet rack traverse:
The traverse type 4 BST is used to insert chipboards, steel panels or similar, which then finish +/- flush with the upper edge of the shelf traverse.
This means that there is no loss of height, and the front of the step crossbar protects the shelves or the insertion segments from damage.
The crossbars are not used for pallet storage, but as picking levels; i.e. storage of cartons, small parts or similar.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2012
Hantar permintaan
Telefon & Faks
+49 4946 ... iklan
Iklan anda telah berjaya dipadamkan
Berlaku ralat