Mesin hobbing gearLIEBHERR
LC 200
Data mesin
- Nama mesin:
- Mesin hobbing gear
- Pengeluar:
- LIEBHERR
- Model:
- LC 200
- Nombor mesin:
- 1443
- Tahun pembuatan:
- 2005
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Diameter meja:
- 180 mm
- Diameter gear:
- 200 mm
- Panjang gelendong penggilingan:
- 230 mm
- Kelajuan gelendong (maks.):
- 750 rpm
- Sudut putaran paksi A (min.):
- -45 °
- Sudut putaran paksi A (maks.):
- 45 °
penyediaan
- Lokasi:
- Hessen, Jerman
– Jarak: lebih kurang 9,884 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€10,000.00 (wajib)
percuma
Penerangan
TECHNICAL DETAILS
Max. workpiece diameter: 200 mm
Table diameter: 180 mm
Max. table speed: 100 rpm
Center distance: 15 - 400 mm
Machine stand
max. axial travel: 600 mm
Milling head swivel device
Milling head swivel angle: ± 45 degrees
milling head
Drive power: 27 kW
max. module: 7 mm
Max. cutter speed: 750 rpm
max. cutter diameter: 160 mm
max. cutter length: 230 mm
max. tangential travel: 200 mm
Max. tangential speed: 3,000 mm/min
Object
Max. counterholder travel: 540 mm
Max. counterholder rapid traverse: 15,000 mm/min
Max. counter arm force: 13 kN
MACHINE DETAILS
Total weight approximately: 15,000 kg
Ambient temperature: 15 - 38 °C
Operating voltage (tolerance +/- 10%): 400 V
Operating frequency (tolerance +/- 2%): 50 Hz
Control voltage: 24 V DC
Hydraulics
Hydraulic oil: HLP 46
max. operating pressure: 70 bar
Pump flow rate: 24 l/min
Hydraulic volume in the hydraulic tank approx.: 7 l
Max. average noise level: 82 dB(A)
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A19886750
- Nombor rujukan:
- AUC-2508152
- Kemas kini:
- terakhir pada 01.09.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Jerman LIEBHERRLC200
Lontzen WohlenbergH 1250 SE
Hilden KLINGELNBERG-OERLIKONT60 A
Witten BecheKGH 4B
Concordia Sagittaria SASSTRM 2200
Salach BECHEL 9
Babberich WotanB130
Rowley Regis Mostana1M63 x 3000mm Gap Bed Centre Lat
Sweden Merli Clovis50x6000
Iserlohn JUNGENTHALDK 1400
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.