Set 8 unit pengapit pantas Lenzkes K16 (K-Line)Lenzkes
K16 Quick Mold Clamp (K-Line)
Set 8 unit pengapit pantas Lenzkes K16 (K-Line)
Lenzkes
K16 Quick Mold Clamp (K-Line)
Keadaan
Terpakai
Lokasi
Trenčianske Stankovce 

Data asas
- Nama mesin:
- Set 8 unit pengapit pantas Lenzkes K16 (K-Line)
- Pengeluar:
- Lenzkes
- Keadaan:
- sangat baik (terpakai)
Harga & Lokasi
- Lokasi penjual:
- 3011 Sedličná, 913 11 Trenčianske Stankovce, Slovakia

Hubungi
Butiran tawaran
- ID iklan:
- A23339780
- Nombor rujukan:
- 260372
- Kemas kini:
- terakhir pada 16.11.2026
Penerangan
Set of 8x Lenzkes K16 Quick Mold Clamp (K-Line)
These are mechanical mold clamps (quick-release clamps) by LENZKES ,
series 100-16K (with T-slot nut), designed for injection molding machines.
There are 8 pieces in total shown in the photos.
Ijdpo Akk Efofx Adrebd
Technical Parameters (Lenzkes 100-16K)
1. Manufacturer: Lenzkes Spanntechnik GmbH (Germany)
2. Model / Type: 100-16K (casting markings on both the body and bottom T-nut: 100-16K / K16)
3. Quantity in photos: 8 pcs
4. Bolt thread: M16 (strength class 12.9, internal hexagon socket)
5. T-slot width: 16 mm (per the 16K designation – T-slot nut with self-aligning swivel joint)
6. Maximum clamping force: 45 kN (approx. 4.5 tons per clamp)
7. Tightening torque: 150 Nm
8. Clamping height: steplessly adjustable (typically 0 – 45 mm without the need for shims/packing)
9. Application: clamping injection molds onto injection molding machine platens
These are mechanical mold clamps (quick-release clamps) by LENZKES ,
series 100-16K (with T-slot nut), designed for injection molding machines.
There are 8 pieces in total shown in the photos.
Ijdpo Akk Efofx Adrebd
Technical Parameters (Lenzkes 100-16K)
1. Manufacturer: Lenzkes Spanntechnik GmbH (Germany)
2. Model / Type: 100-16K (casting markings on both the body and bottom T-nut: 100-16K / K16)
3. Quantity in photos: 8 pcs
4. Bolt thread: M16 (strength class 12.9, internal hexagon socket)
5. T-slot width: 16 mm (per the 16K designation – T-slot nut with self-aligning swivel joint)
6. Maximum clamping force: 45 kN (approx. 4.5 tons per clamp)
7. Tightening torque: 150 Nm
8. Clamping height: steplessly adjustable (typically 0 – 45 mm without the need for shims/packing)
9. Application: clamping injection molds onto injection molding machine platens
Iklan anda telah berjaya dipadamkan
Berlaku ralat

















