Mesin pengikat tepi sehingga ketinggian pelekat 100 mmLange Maschinenbau
B 70 K-100
Mesin pengikat tepi sehingga ketinggian pelekat 100 mm
Lange Maschinenbau
B 70 K-100
Tahun pembuatan
2018
Keadaan
Terpakai
Lokasi
Jerman 

Gambar menunjukkan
Tunjukkan peta
Data mesin
Harga & Lokasi
- Lokasi:
- D - Hessen

Hubungi
Butiran tawaran
- ID iklan:
- A19137466
- Nombor rujukan:
- ISSH20230727-4468
- Kemas kini:
- terakhir pada 28.10.2025
Penerangan
Used machine
Year of manufacture: 2018
Special feature: Machine for up to 100 mm edge height!
Condition: Factory-inspected by Lange Maschinenbau
Equipment and technical data:
- Machine table with 13 running rollers for improved workpiece guidance
- Edge feeding, synchronous with belt feed
- Edge thickness adjustable via digital counter
- Pneumatic roller separation with knife (for cuttable edges)
- Three pressure rollers
- Belt feed:
- 0.25 kW
- approx. 1250 mm long
- approx. 6.0 m/min
- 50 mm wide toothed belt with thick, workpiece-friendly rubber top
- Digital counter for height adjustment
- Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill
- Flush cutting unit:
- for front and rear workpiece edges
- automatic sensing at the workpiece
- pneumatic cutting with knife for cuttable edges
- Flush trimming unit
- with vertical sensing and horizontal guidance
- reproducible setting using digital counters
- 2 powerful 0.4 kW high-frequency motors
- stepless speed adjustment from 4000 to 18000 rpm
- Cutter Ø 70 mm, Z4, radius 2 mm/15°
- central extraction nozzle Ø 100 mm
- 2 chip extraction hoods with hose Ø 60 mm
- Automatic height adjustment of the upper cutter with belt feed
- Continuous workpiece support approx. 1800 mm long
- Workpiece support rail, extendable by approx. 300 mm
- Rotatable foil dispenser Ø: 800 mm
- Workpiece width: min. approx. 80 mm
- Workpiece thickness: 10 – 100 mm
- Workpiece length: min. approx. 220 mm
- Edge thickness: 0.4 – 2.0 mm
- Roller separation: max. 1.0 x 55 mm, 2 x 45 mm
- Glue pot heating capacity: 2.7 kW
- Heat-up time: approx. 10 minutes
- Working height: approx. 880 mm
- Electrical connection: 400V, 50 Hz, 3Ph + N
- Total connected load: 3.8 kW
Kfsdpfx Agjwka S Iepoa
- Pneumatic connection: 6 Bar
Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm
Weight: approx. 260 kg
Availability: short-term
Location: Flörsheim
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Year of manufacture: 2018
Special feature: Machine for up to 100 mm edge height!
Condition: Factory-inspected by Lange Maschinenbau
Equipment and technical data:
- Machine table with 13 running rollers for improved workpiece guidance
- Edge feeding, synchronous with belt feed
- Edge thickness adjustable via digital counter
- Pneumatic roller separation with knife (for cuttable edges)
- Three pressure rollers
- Belt feed:
- 0.25 kW
- approx. 1250 mm long
- approx. 6.0 m/min
- 50 mm wide toothed belt with thick, workpiece-friendly rubber top
- Digital counter for height adjustment
- Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill
- Flush cutting unit:
- for front and rear workpiece edges
- automatic sensing at the workpiece
- pneumatic cutting with knife for cuttable edges
- Flush trimming unit
- with vertical sensing and horizontal guidance
- reproducible setting using digital counters
- 2 powerful 0.4 kW high-frequency motors
- stepless speed adjustment from 4000 to 18000 rpm
- Cutter Ø 70 mm, Z4, radius 2 mm/15°
- central extraction nozzle Ø 100 mm
- 2 chip extraction hoods with hose Ø 60 mm
- Automatic height adjustment of the upper cutter with belt feed
- Continuous workpiece support approx. 1800 mm long
- Workpiece support rail, extendable by approx. 300 mm
- Rotatable foil dispenser Ø: 800 mm
- Workpiece width: min. approx. 80 mm
- Workpiece thickness: 10 – 100 mm
- Workpiece length: min. approx. 220 mm
- Edge thickness: 0.4 – 2.0 mm
- Roller separation: max. 1.0 x 55 mm, 2 x 45 mm
- Glue pot heating capacity: 2.7 kW
- Heat-up time: approx. 10 minutes
- Working height: approx. 880 mm
- Electrical connection: 400V, 50 Hz, 3Ph + N
- Total connected load: 3.8 kW
Kfsdpfx Agjwka S Iepoa
- Pneumatic connection: 6 Bar
Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm
Weight: approx. 260 kg
Availability: short-term
Location: Flörsheim
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2008
Hantar permintaan
Telefon & Faks
+49 6146 ... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Iklan kecil
Bitburg
10,048 km
Deduster udara mentah mudah alih dengan bekas
AL-KOAAS 3013 - AFB
AL-KOAAS 3013 - AFB
Iklan kecil
Spatenhof
9,419 km
Mesin pengikat tepi
HOLZ-HERSprint 1310-1 + PU
HOLZ-HERSprint 1310-1 + PU
Iklan kecil
Złotogłowice
9,274 km
RAK SLIDE-OUT UNTUK MENYIMPAN GL
EXPOGLASS ®M80-30
EXPOGLASS ®M80-30
Iklan kecil
Oud-Alblas
10,146 km
Pencincang dengan dua gandar
Arjesekomaxx 800
Arjesekomaxx 800
Iklan kecil
Geiselwind
9,769 km
Gerbang mendatar
SchulteGG 10
SchulteGG 10
Iklan kecil
Grevesmühlen
9,693 km
Mesin mengasah pintu
RivoGA250
RivoGA250
Iklan kecil
Zuzenhausen
9,892 km
Pencincang
WEIMAWLK 1500
WEIMAWLK 1500
Iklan kecil
Siedlce
8,944 km
Gergaji ukuran, gergaji ukuran dengan gergaji pemarkahan
CORMAKMJ45-KB4 (3200)
CORMAKMJ45-KB4 (3200)
Iklan kecil
Roreto
10,017 km
Talian pembungkusan
ERREGICompact 250/6R + Tunnel 700
ERREGICompact 250/6R + Tunnel 700
Iklan kecil
Navan
10,852 km
Pencincang Aci Tunggal
WEIMASpider WLK 1500
WEIMASpider WLK 1500
Iklan anda telah berjaya dipadamkan
Berlaku ralat














































































