Pusat pemesinan menegakKUNZMANN
BA 1350
Data mesin
- Nama mesin:
- Pusat pemesinan menegak
- Pengeluar:
- KUNZMANN
- Model:
- BA 1350
- Nombor mesin:
- 135001
- Tahun pembuatan:
- 2011
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Jarak gerakan paksi X:
- 1,350 mm
- Jarak perjalanan paksi-Y:
- 620 mm
- Jarak gerakan paksi Z:
- 810 mm
- Kelajuan gelendong (maks.):
- 12,000 rpm
- Bilangan slot dalam majalah alat:
- 40
penyediaan
- Lokasi:
- Baden-Württemberg, Jerman
– Jarak: lebih kurang 9,825 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€1,000.00 (wajib)
percuma
Penerangan
No reserve price – guaranteed sale to the highest bidder!
Placing a bid obliges you to collect the item within the specified period between 21.09. and 01.10.!
TECHNICAL DETAILS
X-axis travel: 1,350 mm
Y-axis travel: 620 mm
Z-axis travel: 810 mm
Feed and Rapid Traverse
Feed rate X/Y/Z-axis: 15 m/min
Rapid traverse X/Y/Z-axis: 30 m/min
Spindle
Spindle speed: 12,000 rpm
Spindle drive power: 10 kW (100% duty cycle)
Spindle drive power: 12 kW (40% duty cycle)
Spindle taper: ISO 40
Front spindle bearing diameter: 70 mm
Rear spindle bearing diameter: 60 mm
Spindle run hours: 6,510 h
Distance spindle to table: 90 – 900 mm
Distance spindle center to column: 655 mm
Tool magazine
Tool magazine positions: 40
Max. tool length: 300 mm
Max. tool diameter with occupied adjacent slots: 80 mm
Max. tool diameter with free adjacent slot: 125 mm
Worktable
Table length: 1,550 mm
Table width: 620 mm
Number of T-slots: 6
Control
Control manufacturer: HEIDENHAIN
Control model: iTNC 530
MACHINE DETAILS
Main voltage: 400 V
Input frequency: 50 Hz
Input current: 63 A
Apparent power rating: 35 kVA
Dimensions and Weight
Overall length: 7,000 mm
Overall width: 2,700 mm
Overall height: 2,900 mm
Machine weight: 8,650 kg
EQUIPMENT
- Indexing unit, 4th and 5th axis, manufacturer WALTER, type TANIH 200
- LANG 5-axis clamping system
- RENISHAW touch probe
- Chip conveyor
- Documentation and manuals
External reference: Wahl – Lot 69
Note: machine vice on the clamping area not included
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22462832
- Nombor rujukan:
- AUC-2607268
- Kemas kini:
- terakhir pada 30.07.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.