KSB KWP K 200-320 Agregat Pam, 8 unit

KSB KWP K 200-320

KSB KWP K 200-320 Pump Set, 18.5 kW – Complete Set, Documented

8 × KSB Centrifugal Pump KWP K 200-320 – Complete Industrial Unit, incl. Drive
For sale are 8 identical, well-maintained industrial pump units from the renowned KSB KWP K 200-320 series. The units originate from a special order (KSB Pegnitz, order from 1999/2000) and were accepted and tested according to DIN 1944/III with customer acceptance.
Sale of used KSB pump units (year of manufacture 1999, relatively low operating time of approx. 105,000 hours per unit) in as-is condition, without warranty or guarantee. Units have been dismantled; functional tests are possible upon request (without assurance of characteristics). Reference operation with identical units available. Sale preferably in packages; further units potentially available in the future (11 additional units).
Spare parts and service obligations are excluded!

Pump – KSB KWP K 200-320

Manufacturer KSB Aktiengesellschaft, Pegnitz
Type / Series KWP K 200-320 (Impeller pump, radially split volute casing pump)
Works No. 5-N01-541905 (Serial numbers on request)
Flow rate Q 425 m³/h (118 l/s)
Head H 10.25 m
Min. Flow Rate 89.9 m³/h
Speed 970 rpm (constant)
Pump power 14.7 kW
Motor power 18.5 kW
Efficiency 80.8%
NPSH 2.20 m

Operating pressure max. 10 bar
Suction nozzle DN 200, axial
Discharge nozzle DN 200, upwards
Flange DIN 2532 PN 10
Impeller diameter 320 mm (Re-machining form A15, 3-blade)
Bearing carrier P05AX
Shaft seal Tandem-GLRD (non-pressurized quench), Type 4K M3

Materials

Pump casing / Pressure cover / Impeller 9.4460 (stainless, abrasion-resistant)
Shaft sleeve 1.4539
GLRD cover 1.4571
Shaft C 45 N
Base plate GG (gray cast iron)

Drive & Peripherals per Unit

Electric motor VEM, IP55, IEC size 200L, 18.5 kW, 970 rpm, B3, 50 Hz, 400/690 V, Insulation F, 3 PT100 sensors
Coupling Flender Eupex N-H / Size 140, Intermediate sleeve 180 mm
Base plate ZN 24259-G-ISO, Size 9G, GG, 4×M24×320 stud bolts
Quench tank incl. piping 1.4571, without fittings
Coupling guard Steel

Weights per Unit

Pump 350 kg
Motor 175 kg
Base plate 200 kg
Coupling + guard 16 kg
Total 741 kg

Rsdpezp U Tujfx Amgjcd
Available Documentation (per unit)
• Acceptance / Test report of the initial commissioning
EN 10204 / DIN 1944 Class III (5 measuring points)
• Q-H curves (Curve No. K 95231)
• Installation plan / Dimension table with nozzle connections
• Installation drawing of the mechanical seal (Drawing No. 0W244223)
• Piping plan quench tank
• Operating and maintenance instructions

Application area / Application notes
The KWP K series is a proven process centrifugal pump for:
• Wastewater treatment and sewage treatment plant process technology
• Biogas plants and fermentation substrate conveying
• Sugar factories, paper mills, food production
• Biotechnological processes (algae suspensions, fermentation)
• Cooling water circuits and process water conveying in the chemical industry

Further important (sales) information can be found in the attached documents.

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.