Mesin acuan suntikanKraussMaffei
EX 80-380 vollelektrisch/full electrical
Mesin acuan suntikan
KraussMaffei
EX 80-380 vollelektrisch/full electrical
Tahun pembuatan
2009
Keadaan
Terpakai
(berfungsi sepenuhnya)
Lokasi
Hannover 

Data asas
- Nama mesin:
- Mesin acuan suntikan
- Pengeluar:
- KraussMaffei
- Tahun pembuatan:
- 2009
- Keadaan:
- sangat baik (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 35,808 h
Harga & Lokasi
- Lokasi:
- 30 Hannover, Deutschland

Hubungi
Butiran teknikal
Enjin dan kotak gear
Isipadu larian:
204 cm³
Maklumat lanjut
Daya pencengkam:
800 kN
Tekanan suntikan:
1,860 palang
Berat suntikan:
186 g
Diameter skru:
40 mm
Butiran tawaran
- ID iklan:
- A21434367
- Kemas kini:
- terakhir pada 21.10.2026
Penerangan
Here, as a dealer of injection molding machines, we offer the following well-maintained, used injection molding machine:
We also purchase well-maintained injection molding machines manufactured from 2010 onwards.
We have been a wholesale supplier of injection molding machines for over 25 years.
Manufacturer: KraussMaffei
Type: KM EX 80-380 (fully electric)
Serial Number: 61013142
Year of Manufacture: 2009
Operating Hours: 35,808 h
Control System: MC 5
Fully functional
Condition: very well maintained
Machine comes from a German original owner
xxxxx without robot / without temperature control unit xxxxx
Extras:
- Needle-gate nozzle, pneumatically operated
- Pneumatic valve 1 on back wall adapter plate (BWAP)
- Pneumatic control for 1 hot runner
- Pneumatic control for hot runner/cold runner
- Defect sorting chute
- Nozzle protection door - mold opening protection door, hinged
- Euromap interface 18 on front wall adapter plate (FWAP)
- Ejector plate, electrically operated on BWAP
- Hydraulic auxiliary unit for hydraulic core pulls
- Injection molding circuit
- 2 x hydraulic core pulls (on BWAP and FWAP)
- Pressure relief for core pulls on BWAP and FWAP
- Water manifold, 8-way
- 8 x temperature control points for hot runner
- Extrusion injection circuit with position point control
- 3 x 230V sockets / 2 x CEE 16A / 1 x CEE 32A
- Signal interface EUROMAP 67 for robot
- Start-up circuit, QS package, cycle time analysis, cycle memory, event log
- BluePOWER package – display of energy consumption
- Graphics analysis package, trend graph
- Interface for temperature control unit
- Cycle time analysis, cycle setpoint optimization
Main language: German
Injection Unit
Screw diameter: 40 mm
Injection weight: 186 g/PS
Injection pressure: 1860 bar
Injection volume: 204 ccm
Clamping Unit
Clamping force: 80 tons / 800 kN
Tie bar distance: 420 x 420 mm
Platen dimensions: 655 x 670 mm
Tool installation height: 250 mm
Itjdpfoyrd U Uex Adlsp
Maximum distance between platens: 750 mm
Ejector stroke / force: 100 mm / 22 kN
Clamping unit: fully electric
Warranty
Warranty until first commissioning
- Available immediately from our warehouse in Hanover, free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs throughout Europe.
Worldwide delivery by container or box is also possible. Organization of customs clearance included.
- The machine was tested before dismantling.
- The machine is in our sole ownership.
- The requested machine is available immediately in our warehouse in Hanover and will be offered after functional testing and can be inspected under power.
For information about the machines we offer and our company:
- We only sell our own machines that we have purchased from current production, from our warehouse in Hanover.
- All offered machines are checked and tested before dismantling.
- We do NOT sell insolvency goods. We are NOT a mediator who deals with third-party property.
- All offered machines come from successful companies for which maintenance and care are a matter of course.
- All offered machines can be inspected at our warehouse.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
We also purchase well-maintained injection molding machines manufactured from 2010 onwards.
We have been a wholesale supplier of injection molding machines for over 25 years.
Manufacturer: KraussMaffei
Type: KM EX 80-380 (fully electric)
Serial Number: 61013142
Year of Manufacture: 2009
Operating Hours: 35,808 h
Control System: MC 5
Fully functional
Condition: very well maintained
Machine comes from a German original owner
xxxxx without robot / without temperature control unit xxxxx
Extras:
- Needle-gate nozzle, pneumatically operated
- Pneumatic valve 1 on back wall adapter plate (BWAP)
- Pneumatic control for 1 hot runner
- Pneumatic control for hot runner/cold runner
- Defect sorting chute
- Nozzle protection door - mold opening protection door, hinged
- Euromap interface 18 on front wall adapter plate (FWAP)
- Ejector plate, electrically operated on BWAP
- Hydraulic auxiliary unit for hydraulic core pulls
- Injection molding circuit
- 2 x hydraulic core pulls (on BWAP and FWAP)
- Pressure relief for core pulls on BWAP and FWAP
- Water manifold, 8-way
- 8 x temperature control points for hot runner
- Extrusion injection circuit with position point control
- 3 x 230V sockets / 2 x CEE 16A / 1 x CEE 32A
- Signal interface EUROMAP 67 for robot
- Start-up circuit, QS package, cycle time analysis, cycle memory, event log
- BluePOWER package – display of energy consumption
- Graphics analysis package, trend graph
- Interface for temperature control unit
- Cycle time analysis, cycle setpoint optimization
Main language: German
Injection Unit
Screw diameter: 40 mm
Injection weight: 186 g/PS
Injection pressure: 1860 bar
Injection volume: 204 ccm
Clamping Unit
Clamping force: 80 tons / 800 kN
Tie bar distance: 420 x 420 mm
Platen dimensions: 655 x 670 mm
Tool installation height: 250 mm
Itjdpfoyrd U Uex Adlsp
Maximum distance between platens: 750 mm
Ejector stroke / force: 100 mm / 22 kN
Clamping unit: fully electric
Warranty
Warranty until first commissioning
- Available immediately from our warehouse in Hanover, free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs throughout Europe.
Worldwide delivery by container or box is also possible. Organization of customs clearance included.
- The machine was tested before dismantling.
- The machine is in our sole ownership.
- The requested machine is available immediately in our warehouse in Hanover and will be offered after functional testing and can be inspected under power.
For information about the machines we offer and our company:
- We only sell our own machines that we have purchased from current production, from our warehouse in Hanover.
- All offered machines are checked and tested before dismantling.
- We do NOT sell insolvency goods. We are NOT a mediator who deals with third-party property.
- All offered machines come from successful companies for which maintenance and care are a matter of course.
- All offered machines can be inspected at our warehouse.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Wrocław
9,306 km
Mesin cetak suntikan
BattenfeldHM 60/350 S
BattenfeldHM 60/350 S
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Weißenburg in Bayern
9,738 km
Mesin cetak suntikan
NetstalSynergy 1000-230
NetstalSynergy 1000-230
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Hilzingen
9,909 km
Bruderer BSTA 110
BRUDERERBSTA 110
BRUDERERBSTA 110
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Burgoberbach
9,764 km
Mesin cetak suntikan
KraussMaffeiKM 130-750CX 61010843
KraussMaffeiKM 130-750CX 61010843
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Vaterstetten
9,684 km
Mesin cetak suntikan
KraussMaffei Technologies GmbHKM 80 / 250 PA G01
KraussMaffei Technologies GmbHKM 80 / 250 PA G01
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Fuente de Cantos
11,305 km
Mesin pengisar tanpa pusat
ESTARTA310
ESTARTA310
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Cuggiono
9,930 km
Pusat pemesinan menegak
DOOSANDNM 6700L
DOOSANDNM 6700L
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Szigetszentmiklós
9,143 km
Mesin pengisar silinder
PalmaryGU20x40 NC unversal grinding machine
PalmaryGU20x40 NC unversal grinding machine
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Eisingen
9,906 km
Mesin cetak suntikan
ENGELe-motion 310/160T
ENGELe-motion 310/160T
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Belgium
10,186 km
Pusat pusingan dan pengilangan CNC
DMGNTX 2500/1500
DMGNTX 2500/1500
Iklan anda telah berjaya dipadamkan
Berlaku ralat



















































































































































