KHASIAT

Knuth Machine Tools Turnado 230/1500

We are selling our Knuth Werkzeugmaschinen GmbH lathe.

High-quality centre lathe with leadscrew and feedshaft, equipped with a 3-axis position display.

We are relocating and no longer require the machine, so it is available for sale. It is currently still in operation and can be inspected on-site.

Proven classic with gear transmission:

- Cost-effective and retains its value
- Clearly arranged control panel with ergonomically positioned selector levers
- Camlock spindle mount D1-6
- Wide, ground and hardened bed with a solid one-piece cast base
- Tailstock can be offset laterally for taper turning
- Large selection of thread pitches
- Removable gap bridge for machining large diameters
- Stop spindle with four adjustable length stops
Njdpoyxfuqjfx Aagokw
- Optional: quick-change toolpost system, among others

3-axis position display:

- Higher machining accuracy
- Reduced error rate
- Greater production reliability
- Significant time savings
- Increased productivity
- Optimal legibility of the display
- User-friendly functions
- Clearly arranged keypad
- Resolution 0.01 / 0.005 mm
- Pre-setting of coordinate values
- Retains axis position when display is switched off
- Bolt hole circle calculation
- Integrated calculator function
- Memory for 10 tools
- Switch between radius/diameter display
- mm/inch conversion
- Easy mounting, maintenance-free operation
- Display of cross slide (Z0) and carriage (Z1) both individually or as a differential/sum value on lathes

Technical data – Turnado 230/1500 – Centre lathe with leadscrew and feedshaft

Working area
- Centre distance: 1500 mm
- Max. swing over bed: 460 mm
- Max. swing over cross slide: 270 mm
- Max. swing over gap bridge: 690 mm
- X-axis travel: 285 mm
- Z1-axis travel: 128 mm
- Gap bridge length: 165 mm
- Bed width: 300 mm
- Top slide swivel range: ±52°

Main spindle
- Spindle speed (12 steps): 25–2000 rpm
- Spindle bore: 58 mm
- Spindle mount: Camlock D1-6
- Spindle taper: MT 6

Feed
- X-axis feed: 0.014–0.784 mm/rev
- Z-axis feed: 0.031–1.7 mm/rev

Thread cutting
- Metric threads (41): 0.1–14 mm
- Diametral pitch threads (50): 4–112 DP
- Module threads (34): 0.1–7 mm
- Whitworth threads (60): 2–112 TPI

Tailstock
- Tailstock quill diameter: 60 mm
- Tailstock taper: MT 4
- Tailstock quill travel: 120 mm
- Tailstock lateral adjustment: ±13 mm / ±0.5"

Drive capacities
- Main drive motor power: 5.5 kW
- Supply voltage: 400 V

Dimensions and weight
- Dimensions: 2750 x 1080 x 1340 mm
- Weight: 1970 kg

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.