3-warna mesin cetak pad automatikKeller Poligrafia dla Przemysłu
3-colour KELLER Tampo master
3-warna mesin cetak pad automatik
Keller Poligrafia dla Przemysłu
3-colour KELLER Tampo master
Tahun pembuatan
2018
Keadaan
Terpakai
(berfungsi sepenuhnya)
Lokasi
Dąbrowa 

Data asas
- Nama mesin:
- 3-warna mesin cetak pad automatik
- Pengeluar:
- Keller Poligrafia dla Przemysłu
- Model:
- 3-colour KELLER Tampo master
- Nombor mesin:
- TAM-164
- Tahun pembuatan:
- 2018
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Harga & Lokasi
- Lokasi:
- Polna 9, 62-070 Dąbrówka, Polska

Hubungi
Butiran teknikal
Dimensi dan berat
Jumlah panjang:
8,200 mm
Lebar keseluruhan:
1,880 mm
Jumlah ketinggian:
1,950 mm
Butiran kuasa
Voltan masuk:
400 V
Arus masuk:
32 A
Jenis arus masuk:
tiga fasa
Dokumentasi dan pensijilan
Tempoh jaminan:
3 bulan
Dokumentasi / manual
Plat jenis tersedia
Penandaan CE
Maklumat lanjut
Sambungan udara termampat:
6 palang
Sambungan pneumatik:
12 palang
Kuasa motor servo:
14,000 W
Butiran tawaran
- ID iklan:
- A22799870
- Kemas kini:
- terakhir pada 23.09.2026
Penerangan
Used automatic KELLER Tampo master pad printing machine, designed for decorating pens and cylindrical parts. The machine enables 3-colour printing. The machine operates in fully automatic mode: the operator loads the parts into the feeder, and after completion of the process, the finished parts are automatically unloaded into a carton.
The equipment includes a servo-driven chain conveyor, automatic part loading and unloading modules, a positioning station, an ionizer, three independent pad printing modules with an automatic pad cleaning system, hot-air drying between the individual printing stations, an IR drying tunnel after completion of the printing process, and a vision inspection system for print quality with automatic rejection of defective parts. Adjustable conveyor prisms and pneumatic rotary modules allow the machine settings to be adapted to different part dimensions. The machine is controlled by a Mitsubishi PLC and a 10″ HMI touchscreen, allowing recipes and process parameters to be managed. The machine is also equipped with a remote communication module.
The production process starts with the automatic transfer of the part from the feeder onto the conveyor. The ionizer neutralizes electrostatic charges on the surface of the part before printing. The part is then positioned and transferred successively to three pad printing stations. Each station applies one colour, with hot-air drying between the individual printing stages. After completion of the three-colour printing process, the part passes through the IR drying tunnel and is then subjected to automatic vision inspection. Finished parts are automatically unloaded into a carton, while parts with detected defects are diverted to a separate container.
Maximum graphic size: 60 × 60 mm
Part dimensions: length 60–150 mm, diameter 8–14 mm.
Machine output: up to 2400 pcs/h.
Electrical power supply: 3 × 400 V, 32 A.
Required compressed air pressure: 6–8 bar.
The machine is operational and in working condition. A link to a video showing the machine in operation is provided below.
Before sale, the machine will undergo servicing, and we provide a 3-month warranty. The machine can be inspected and demonstrated in operation at our premises in Poland (European Union). The standard demonstration includes a presentation of the machine's operation. Upon request, we can perform paid technological tests using the customer's parts.
The machine is sold in the condition and configuration shown in the photographs. Upon request, modifications or additional equipment can be provided according to the customer's individual requirements.
Hfjdoz D Ht Tspfx Aixjp
Standard delivery terms: EXW. We can additionally arrange transport to a location anywhere in the world.
Additional equipment: possibility of manufacturing dedicated tooling for a specific part and carrying out technological tests, including selection of printing parameters and consumables.
The price is quoted in EUR.
The equipment includes a servo-driven chain conveyor, automatic part loading and unloading modules, a positioning station, an ionizer, three independent pad printing modules with an automatic pad cleaning system, hot-air drying between the individual printing stations, an IR drying tunnel after completion of the printing process, and a vision inspection system for print quality with automatic rejection of defective parts. Adjustable conveyor prisms and pneumatic rotary modules allow the machine settings to be adapted to different part dimensions. The machine is controlled by a Mitsubishi PLC and a 10″ HMI touchscreen, allowing recipes and process parameters to be managed. The machine is also equipped with a remote communication module.
The production process starts with the automatic transfer of the part from the feeder onto the conveyor. The ionizer neutralizes electrostatic charges on the surface of the part before printing. The part is then positioned and transferred successively to three pad printing stations. Each station applies one colour, with hot-air drying between the individual printing stages. After completion of the three-colour printing process, the part passes through the IR drying tunnel and is then subjected to automatic vision inspection. Finished parts are automatically unloaded into a carton, while parts with detected defects are diverted to a separate container.
Maximum graphic size: 60 × 60 mm
Part dimensions: length 60–150 mm, diameter 8–14 mm.
Machine output: up to 2400 pcs/h.
Electrical power supply: 3 × 400 V, 32 A.
Required compressed air pressure: 6–8 bar.
The machine is operational and in working condition. A link to a video showing the machine in operation is provided below.
Before sale, the machine will undergo servicing, and we provide a 3-month warranty. The machine can be inspected and demonstrated in operation at our premises in Poland (European Union). The standard demonstration includes a presentation of the machine's operation. Upon request, we can perform paid technological tests using the customer's parts.
The machine is sold in the condition and configuration shown in the photographs. Upon request, modifications or additional equipment can be provided according to the customer's individual requirements.
Hfjdoz D Ht Tspfx Aixjp
Standard delivery terms: EXW. We can additionally arrange transport to a location anywhere in the world.
Additional equipment: possibility of manufacturing dedicated tooling for a specific part and carrying out technological tests, including selection of printing parameters and consumables.
The price is quoted in EUR.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2026
1 Iklan dalam talian
Hantar permintaan
Telefon & Faks
+48 606 6... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Władysławowo
9,160 km
Mesin cetak digital
DIP TECHGlassJet NOVO
DIP TECHGlassJet NOVO
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Gdańsk
9,205 km
Mesin thermoforming pulpa kertas
Taiwan Pulp MoldingTPM-1500
Taiwan Pulp MoldingTPM-1500
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Romania
8,506 km
Mesin pembuatan cawan kertas
Paper LidPL-145
Paper LidPL-145
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Częstochowa
9,150 km
Barisan pengeluaran meltblown berkualiti tinggi
ReifenhäuserReicofil MB 1600
ReifenhäuserReicofil MB 1600
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Bromley
10,474 km
HP JET FUSION 3D 580
HP580
HP580
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Niederaula
9,824 km
Mesin percetakan digital
CanonImagepress V900
CanonImagepress V900
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Enger
9,882 km
Mesin cetak fleksografi
SIATL36-150 TC-CE
SIATL36-150 TC-CE
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Dresden
9,538 km
Mesin mengecat
DuploDuSense DDC-810
DuploDuSense DDC-810
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Jerman
9,760 km
Unit percetakan flexografik
WDBSMB FD10-4 UV
WDBSMB FD10-4 UV
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Warszawa
9,037 km
Mesin penamat label
PrudenteFU 300
PrudenteFU 300
Iklan anda telah berjaya dipadamkan
Berlaku ralat
























































































































































