Treler separa terbuka dengan kanvas

KÖGEL MEGA Hubdach, Vario FIX, 1. Liftachse

Kögel MEGA S24 MEGA, lift axle, first axle lift, lifting roof, Vario Loch-FIX chassis, BPW axles, pallet stop strips left and right, sliding side curtain, sliding roof cover, toolbox, one owner, as new condition.

Permissible fifth wheel load: 12,000 kg
Technically possible fifth wheel load: approx. 12,000 kg
Permissible aggregate axle load: 24,000 kg (8,000 kg per axle)
Technically possible aggregate axle load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross weight: 36,000 kg
Technically permissible gross weight: approx. 39,000 kg
Unladen weight basic configuration: approx. 6,130 kg
Unladen weight of individual vehicle configuration approx.: 6,582 kg
Theoretical payload: approx. 29,418 kg
Floor loading capacity according to DIN EN 283 with test axle load 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle distance: approx. 1,310 mm
(A2) Axle distance: approx. 1,310 mm
(D) Total length: approx. 13,950 mm
(E) Total width: approx. 2,550 mm
(F) Loading floor length, internal: approx. 13,620 mm
(G) Loading floor width, internal: approx. 2,480 mm
(G2) Rear loading width: approx. 2,480 mm
Tire size: 445/45R19.5
(H1) Loading height unladen in driving position, level: approx. 1,020 mm
(H2) Loading height laden in driving position, level: approx. 990 mm
(H3) Attainable ramp height at vehicle rear with kingpin height 910 mm, laden, raised: approx. 1,200 mm
Ride height set at 265 mm.
(K) Side loading height, internal: front approx. 2,735 mm - 2,860 mm [adjustable in 5x25 mm steps], rear approx. 2,810 - 2,860 mm [adjustable in 1x50 mm step]
(K1) Interior height under roof: front approx. 2,875 mm - 3,000 mm [adjustable in 5x25 mm steps] | rear approx. 2,950 mm - 3,000 mm [adjustable in 1x50 mm step]
(X1) Total height unladen in driving position, level: = H1 + K + T +/- superstructure height adjustment | = S + P + K + T +/- superstructure height adjustment
(X2) Total height laden in driving position, level: = H2 + K + T +/- superstructure height adjustment
Superstructure settings: The "Mega" body design allows height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, side loading height, interior height) vary accordingly depending on the selected body setting.

(T) Roof construction height at side: approx. 180 mm. Due to the roof girder design, the pallet-compatible interior height under roof matches the stated interior height under roof.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
Hjdpfjyuzvbox Afdoni
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm
(P) Construction height above kingpin: approx. 90 mm
(S) Possible kingpin height unladen: approx. 930 - 1,060 mm, sits level at approx. 930 mm (Total height to be observed!)
Braking system as per ECE-R13
Electrical system as per ECE-R48
Wabco brakes, air suspension
BPW three-axle ECO Air unit with disc brakes Ø 370 mm, ET 120, air suspension 260 mm stroke.
Tires: 6 x 445/45 R 19.5
Steel pallet stop strips with VarioFix hole pattern (bolted), left and right in direction of travel
Vario Fix steel perforated outer frame with 3 pairs of stake pockets
Mechanical/hydraulic lifting device, lifting height from lowest position approx. 500 mm/600 mm, 4 control levers at corner posts. Fulfils the occupational safety directive according to BGV D 29. (Lifting roof can only be operated with doors open!)
Cargo securing certificate according to EN 12642 XL (VDI 2700). For road transport

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.