Mesin lipat plat logamJorns
78-J-HY-SM-OP-6 x 1,25
Data asas
- Nama mesin:
- Mesin lipat plat logam
- Pengeluar:
- Jorns
- Model:
- 78-J-HY-SM-OP-6 x 1,25
- Nombor mesin:
- 8444-08
- Tahun pembuatan:
- 1985
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
Bahan/produk boleh diproses
penyediaan
- Lokasi:
- Rheinland-Pfalz, Jerman
– Jarak: lebih kurang 10,037 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- EXW
percuma
Penerangan
No minimum price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Maximum bending length: 6,000 mm
Maximum material thickness: 1.25 mm
Mechanical cutting device
Hydraulic power unit
Gear pump flow rate: 14.5 l/min
Operating pressure: 140 bar
Maximum pressure: 210 bar
Electric motor power: 3 kW
Motor speed: 1,450 rpm
Voltage: 380 V
Frequency: 50 Hz
Oil reservoir capacity: 30 l
Pressure gauge diameter: 63 mm
Pressure gauge range: 0–250 bar
Pressure switch: 90 bar
Hydraulic components
Gear pump CPL 9 DQ
Intermediate flange L25-2/004
Flexible coupling G 228/2P
Return filter
Filling and breather filter
Oil level indicator
Drain nozzle
Glycerin-filled pressure gauge
Manifold block with pressure, flow control, brake and solenoid valves
Hydraulic cylinders
Number of hydraulic cylinders: 8
Type: GHZ-50 × 225-S special
Piston rod with external M20 thread
Length: 20 mm
Rear swivel bearing
Hydraulic motors
Number of hydraulic motors: 4
Type: OMP 50
MACHINE DETAILS
Control
Electrical machine control with OP control board
Adjustable waiting times, angle ranges, and shut-off delays
Variant control for different machine functions
EPROM-based control system
Electrical supply
Mains voltage: 380 V
Frequency: 50 Hz
EQUIPMENT
Hydraulic power unit OP-14 SM
8 hydraulic cylinders GHZ-50 × 225-S special
4 hydraulic motors OMP 50
Gear pump CPL 9 DQ
Manifold block with hydraulic valves
Return filter
Filling and breather filter
Oil level indicator
Glycerin-filled pressure gauge
Pressure switch
Electrical OP control
Hydraulic and electrical circuit diagrams
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Jenis pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22703202
- Nombor rujukan:
- AUC-2609033
- Kemas kini:
- terakhir pada 07.09.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Trittau RAS74.30 3200 x 4mm
Dobronín BIEGEMASTERBM 6.1,5
Jerman Bang & CoBC-650 CA
Dortmund GenieGS-4069 DC
Warngau JornsNL125-SM-OP-6
Sinsheim NN
Mundolsheim THALMANNTZ 200 6.4M
Tata Forstner AG 5000 b2mf5000kg 1500mm
Gräfenthal PBKE 1200
Arth FastiPC 4000
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.