Mesin pengilangan alat

ISEL SONDERANLAGE

4-axis CNC machining center ISEL Sonderanlage - 06/2007

X1680 Y1000 Z600 – spindle 2.2 kW / 15,000 rpm – table 1660×1750 mm – 4th rotary axis Ø1660 L1750 mm – PC + MAYKA (installed on integrated PC)

Ready for use, operational and can be demonstrated under power.
Location: Industrial zone 06510 CARROS

CNC machining center / milling machine, 4-axis, brand ISEL (isel automation – Germany).
Special custom-built machine “Sonderanlage” (manufacturer’s plate), year 06/2007, Serial No. 293215/1, CE marked.

Primarily used for precision foam machining, but this is a true CNC machining center: the range of materials depends mainly on tooling and process parameters.

Dimensions: length 2.70 m - width 2 m - height 2.50 m.
Operating hours counter not accessible in this configuration.
Mayka installed and fully functional on the PC.
Last tested 13/01/2026: all axis movements OK.
Can be inspected and tested onsite: axis travel and start-up possible.
Chip extraction included but non-operational (requires servicing).

Operating hours: not available (counter inaccessible)
Travel: X 1680 mm / Y 1000 mm / Z 600 mm
Usable table: 1660 × 1750 mm (T-slots / clamping)
4th rotary axis included: Ø 1660 mm, length 1750 mm
Drive: ball screws + belts, linear rail guides
Drives: servo motors
Spindle ISEL F8LI2S2/-8-043: 2.2 kW, 15,000 rpm, manual tool change
Tooling included: 1 tool holder + 11 collets (spindle-specific system) + clamping nut
Cooling: spindle air cooling + chiller present
Safety: fully guarded machine + emergency stop
Nksdpjycqu Njfx Afgjt
Noise: approx. 50 dB during operation, 65 dB during Y-axis movement
Power supply: 400V three-phase, 16A – compressed air not required
Lubrication: none

Control / PC / Software
Electrical cabinet included
Integrated PC + monitor + keyboard (Windows 7)
MAYKA installed and functional on integrated PC (no separate dongle/USB key required)

Maintenance / service history
• March 2019: PC replaced
• March 2019: all drive belts replaced
• March 2019: iCCE10 CANopen PCIe card (1 channel) replaced
• Last test: 13/01/2026 – all movements tested and operational

Brand: ISEL
Model: Sonderanlage
Year: 06/2007
Serial no.: 293215/1
Axes: 4 (with 4th rotary axis)
Travel: 1680 × 1000 × 600 mm
Table: 1660 × 1750 mm
Spindle: 2.2 kW – 15,000 rpm
Supply: 400V three-phase – 16A
PC/software: integrated PC + MAYKA

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.