IMA AVM/K/I/G80/822/S3R3L20

IMA AVM/K/I/G80/822/S3R3L20

Edgebander manufactured in 2003. This IMA AVM/K/I/G80/822/S3R3L20 is designed for milling, edge banding, and postproduction for rebate doors. It features a heavy machine base, a drive for feed speed of approximately 5-25 m/min, and a glue application unit for various edge materials. If you are looking to get high-quality edge banding capabilities, consider the IMA AVM/K/I/G80/822/S3R3L20 machine we have for sale. Contact us for further details regarding this machine.

• Spindle motor power:
• 1 pre-milling unit with 2 motors, each 3 kW
• 1 milling unit with 2 motors, 1 kW
• 1 milling unit with 2 motors, 660 W
• Spindle speed range: 12.000 rpm
• Heating capacity: 5,0 kW
• Used single-sided rebate and edge-banding machine
• Year of manufacture: 2003
• For milling, edge banding and postproduction for a rebate - only on formated / pre-rabbet doors and unrebate doors
• Left machine (fix stop on the left side)
• Total processing in 3 throughfeeds:
•
• throughfeed: door top side (cross processing)
•
• throughfeed: door long side
•
• throughfeed: door long side
• During 2. and 3. throughfeed the edge projection from 1. throughfeed is beeing milled by normal-reverse milling
• The double rebate glueing is only possible by readjustment of the machine and manual postprocessing of the edge
• Max. door thickness:
• Vertical edge: approx. 70 mm
• Rebate glueing: approx. 60 mm
• Heavy machine base as carrier for units
• Drive for feed speed of approx. 5-25 m/min., mechanical stepless adjustable
• Transport chain with plastic plates, approx. 80 mm wide, with automatic central lubrication
• Manually height-adjustable top pressure with v-belt 80 mm wide
• Infeed table
• 1 horizontal manually adjustable unheated infeed fence
• 1 pre-milling unit controllable, not swivable, not tracing
• Glueing unit for optional use of straight edges or softforming, by change of glue application device
• Edge material:
• Strips: up to 1,3 mm
• Coil material: 0,4-3 mm
• Solid wood strips: 6 mm
• Strip length max.: 2550 mm
• Strip height: 14-80 mm (depending on glue application)
• Manual side adjustment for pneumatic moveable glue application
• Manual height adjustment from -15 mm up to +10 mm
• 1 glue application 0,8 L, max. edge height 70 mm, straight edge with pneumatic quick lock, Chem-Coat, electronic temperature control
Bedpfxjzrhbdj Amgjdf
• 1 hot melt glue application 0,8 L with quick-lock, edge height max. 80 mm, soft edge, Chem-Coat, with temperature control and control unit for strips
• 1 automatic Quickmelt hot melt glue application
• 1 2-fold magazine for edge material up to 3,0 mm thickness, manually mountable on the single coil magazine
• 1 rebate shape pressure zone for pressing of edge material to a rebate with:
• an activation unit 15 kW for reactivation of the edge material for rebate-shaping
• a pneumatic controlled shaping tool for the bottom fold edge
• a pneumatic controlled shaping tool for the complete rebate
• additional pressure rollers for the edge areas with rebate
• an electropneumatic side-moving device for the complete pressure zone
• 1 horizontal adjustment with mechanical digital readout
• 1 trimming unit for 2 motors mounted on top pressure for trimming of the front and rear edge/strip projection for trimming flush or with chamfer
• 1 milling unit for 2 motors with height tracing, side tracing, for flush milling from bottom and top, 30° swivable