Mesin jalur tepi satu sisi IMA Advantage 310 (2010)

IMA Advantage 310

- Application of release agent, top/bottom
- Joint milling unit
- Gluing unit
- Trimming unit
- Copy milling unit SKF-L
- Profile trimming blade unit
- Spray cleaning agent
- Self-adjusting trimming blade unit
- Buffing unit

Single-sided edge banding machine
Manufacturer: IMA
Type: Advantage 310
Year of construction: 2010
Technical data
Workpiece
- Workpiece length: min. 150 mm
- Workpiece width: min. 65* / 150 mm

*at a max. workpiece thickness of 25 mm
- Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades

max. 40 mm (with MFA 08.346), 60 mm (with SKF)
- Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm
- Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section)
- Workpiece shape: right-angled
- Material: chipboard, MDF
- Surface material: direct coating (melamine resin paper), paper, film, veneer

Edge material
- Roll material without film:

Paper edges & plastic edges: 0.3 - 3.0 mm
Veneer edges: 0.5 - 3.0 mm
- max. edge cross-section: 150 - 180 mm²
- Cut edge strips:

Strips: 3.0 - 8.0 mm
- max. strip cross-section: 520 mm²
- Edge height: min. 12 mm, max. 65 mm
- max. upper edge overhang: 2 mm
- Edge profiles

Paper edge: approx. 0.4 mm, chamfer 15
Plastic edge up to 3.0 mm, radius depending on the tool
Strip up to 8 mm flush milling (with interchangeable motor on MFA)
Machine
- Constant workpiece projection from the chain track: 35 mm + edge thickness
- max. trimming cross-section 520 mm²
- Throughput width: min. 65 mm (with projection of 35 mm)
- min. workpiece length in feed direction: 150 mm
- Overall height (top edge of chain track): 940 mm
- Unit side: on the left in feed direction
- Pneumatic connection: approx. 7 - 8 bar

Application of release agent, top/bottom
Joint milling unit 08.379 and blowing nozzle
- with 2 motors, each 4 kW, 9000 RPM, 150 Hz

Gluing unit 283.1513 with oil bath gearbox
- Adhesive output 0.8 l, 60 mm high, with quick-lock system
- can be used for hot melt adhesive or PU adhesive
- with single roll / strip magazine, roll diameter 800 mm
- with 3 main pressure rollers and 3 counter pressure rollers

Trimming unit 08.415
- pneumatically swiveling to 0 or 8 degrees
- with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM
- 2 HM trimming saw blades 160 x 3.5 x 22, Z=36

Copy milling unit SKF-L
- with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM
Isdjzuyp Eopfx Akcoih
- and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM
- 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank
- Profile length in the feed direction: max. approx. 50 mm
- Workpiece thickness: max. 60 mm
- Working speed: max. approx. 20 m/min
- Distance between 2 workpieces: min. approx. 400 mm
- min. workpiece projection = 35 mm + profile depth

Profile trimming blade unit 08.519
- For finishing a top and bottom milled quarter-circle profile

Spray cleaning agent
Self-adjusting trimming blade unit 08.521
- for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece

Buffing unit 08.617-2
- with an upper and lower motor: 180 W, 50 Hz, 1400 RPM
- 2 polishing pads 50 x 160 x 19 mm

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.