Pemuat rendahHumbaur
HBT 106224 BS Basic abgeschrägt
Pemuat rendah
Humbaur
HBT 106224 BS Basic abgeschrägt
harga tetap ditambah cukai perkhidmatan
€20,890
Keadaan
Baharu
Lokasi
Burghaun 

Data mesin
Harga & Lokasi
harga tetap ditambah cukai perkhidmatan
€20,890
- Lokasi:
- Burghaun, Hessen

Hubungi
Butiran teknikal
- Konfigurasi gandar:
- 2 gandar
- Lebar keseluruhan:
- 25,500 mm
- Jumlah ketinggian:
- 32,600 mm
- Peralatan:
- ABS
Butiran tawaran
- ID iklan:
- A21120182
- Nombor rujukan:
- hbt106224-1
- Kemas kini:
- terakhir pada 09.06.2026
Penerangan
Humbaur HBT 106224 BS Basic, sloped
Technical data:
Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm
Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm
Permissible total weight: 11,900 kg
Payload: approx. 9,100 kg
Wheelbase: 990 mm
Tires: 235/75 R17.5 inches
Loading height: approx. 920 mm
Drawbar length: approx. 1,800 mm
Coupling height: approx. 750-1000 mm
Ramp angle: approx. 16°
Plank length: approx. 2,600 mm
Plank width: approx. 540 mm
3 pairs of lashing rings, 3,000 kg per lashing point, lashing rings recessed in the floor
7 pairs of lashing rings, 1,000 kg per lashing point, lashing rings in the outer frame
Standard equipment:
Axles: axles from renowned manufacturers
Dkedpjyfvg Aofx Akhen
Suspension: low-maintenance parabolic suspension with load compensation
Tires: tires according to the manufacturer's choice on steel rim
Braking system: ABS braking system according to ECE directive with ALB function, ABS plug connection ISO 7638, spindle parking brake, 2 fail-safe coupling heads red/yellow ISO 1728
Towing device: drawbar with DIN screw eye Ø 40 mm, galvanized, steplessly adjustable via crank
Electrical system: 24V lighting system with multi-chamber tail lights and LED side marker lights, 15-pin connector for lighting
Frame: solid, welded and hot-dip galvanized frame, sloped rear area, incline 12°
Floor: floor made of 40 mm softwood planks
Side walls: side walls made of anodized aluminum, foldable and removable on the side, corner posts galvanized, pluggable at the front and rear
Ramps: 2 foldable steel ramps, 1-piece, galvanized, laterally adjustable, ramp lift 1 gas spring per ramp, ramp locking on the rear crossmember, ramp surface made of galvanized grating
Support: reinforced 12 t geared support with load and quick gear, 2 telescoping folding supports on the left and right at the rear of the vehicle
Equipment: steel fenders with anti-spray mats, side impact protection up to the 1st axle, foldable, 2 chock blocks with holder, contour marking on the side and rear, space for a two-line license plate on the left ramp
On request, we will provide you with a leasing or financing offer.
Mr. Seidel (Tel.) will be happy to assist you.
You can find more information on our website.
... Errors, changes and prior sale reserved!!!
= Further information =
GVWR: 11,900 kg
Please contact Tobias Ebert for further information.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Technical data:
Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm
Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm
Permissible total weight: 11,900 kg
Payload: approx. 9,100 kg
Wheelbase: 990 mm
Tires: 235/75 R17.5 inches
Loading height: approx. 920 mm
Drawbar length: approx. 1,800 mm
Coupling height: approx. 750-1000 mm
Ramp angle: approx. 16°
Plank length: approx. 2,600 mm
Plank width: approx. 540 mm
3 pairs of lashing rings, 3,000 kg per lashing point, lashing rings recessed in the floor
7 pairs of lashing rings, 1,000 kg per lashing point, lashing rings in the outer frame
Standard equipment:
Axles: axles from renowned manufacturers
Dkedpjyfvg Aofx Akhen
Suspension: low-maintenance parabolic suspension with load compensation
Tires: tires according to the manufacturer's choice on steel rim
Braking system: ABS braking system according to ECE directive with ALB function, ABS plug connection ISO 7638, spindle parking brake, 2 fail-safe coupling heads red/yellow ISO 1728
Towing device: drawbar with DIN screw eye Ø 40 mm, galvanized, steplessly adjustable via crank
Electrical system: 24V lighting system with multi-chamber tail lights and LED side marker lights, 15-pin connector for lighting
Frame: solid, welded and hot-dip galvanized frame, sloped rear area, incline 12°
Floor: floor made of 40 mm softwood planks
Side walls: side walls made of anodized aluminum, foldable and removable on the side, corner posts galvanized, pluggable at the front and rear
Ramps: 2 foldable steel ramps, 1-piece, galvanized, laterally adjustable, ramp lift 1 gas spring per ramp, ramp locking on the rear crossmember, ramp surface made of galvanized grating
Support: reinforced 12 t geared support with load and quick gear, 2 telescoping folding supports on the left and right at the rear of the vehicle
Equipment: steel fenders with anti-spray mats, side impact protection up to the 1st axle, foldable, 2 chock blocks with holder, contour marking on the side and rear, space for a two-line license plate on the left ramp
On request, we will provide you with a leasing or financing offer.
Mr. Seidel (Tel.) will be happy to assist you.
You can find more information on our website.
... Errors, changes and prior sale reserved!!!
= Further information =
GVWR: 11,900 kg
Please contact Tobias Ebert for further information.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2007
706 Iklan dalam talian
Hantar permintaan
Telefon & Faks
+49 6652 ... iklan
Iklan anda telah berjaya dipadamkan
Berlaku ralat






