Mesin pelekat tepi + sistem pulanganHomag
KAL 310 + TFU 140
Data asas
- Nama mesin:
- Mesin pelekat tepi + sistem pulangan
- Pengeluar:
- Homag
- Model:
- KAL 310 + TFU 140
- Tahun pembuatan:
- 2011
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 1,651 h
Butiran teknikal
Bahan/produk boleh diproses
Spesifikasi gandar
Maklumat lanjut
penyediaan
- Lokasi:
- Northern Ireland, United Kingdom
– Jarak: lebih kurang 10,814 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
HOMAG KAL 310 + Panel Return Conveyor TFU 140!
TECHNICAL DETAILS
Profile Milling Unit FK11 manual
Edge thickness: max. 3 mm
Motors: 2 units
Motor power: 0.4 kW per motor
Frequency: 200 Hz
Speed: 12,000 rpm
Feed rate: max. 20 m/min
Feed rate during continuous trimming without profile trimming: max. 30 m/min
Panel length single-sided: min. 240 mm
Panel length double-sided: min. 120 mm
Panel thickness: 12 - 60 mm
Panel spacing with PC22: min. 500 mm
Minimum workpiece gap with workpiece thickness over 22 mm: min. 600 mm
Multi-Scraper MN21 Automatic
Number of profiles: max. 5 different profiles
Edge thickness: max. 3 mm
Panel thickness with radius R = 3 mm: min. 13 mm
Panel thickness with chamfer 0.5 x 45°: min. 10 mm
TC knives: 2 units
Chamfer angle: 20°
Radius: R = 1.5 / R = 2 / R = 3 / R = 5
Pre-milling Unit BF10
Motors: 2 units
Motor power: 0.55 kW per motor
Frequency: 200 Hz
Speed: 12,000 rpm
Swivel range: +/- 1°
TC cutter: 70 x 25 mm
HSK: 25
Cutting angle: 54°
Feed speed: 18-25 m/min
Workpiece thickness: 8-60 mm
Edge material coil: 0.3-3 mm
MACHINE DETAILS
Operating hours
Operating hours: 6,358 h
Feed time: 1,651 h
EQUIPMENT
Pre-milling
Automatic inlet fence adjustment
Infeed device with 2 rollers
Quickmelt application unit
2-roller magazine feed
Automatic pressure zone adjustment
Kapp unit HL84 with pneumatic adjustment
Flush trimming unit BF10 with pneumatic adjustment
Profile milling unit FK11
Multi-profile scraper unit MN21 for 5 different profiles
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A21679128
- Nombor rujukan:
- AUC-2604058
- Kemas kini:
- terakhir pada 24.04.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Wijchen SCMOlimpic K 560 HP T ER 2
Metzingen COLLET & ENGELHARDTBF 130 - 11
Stuhr Verkaufsanhänger SellerH-XLT 2500kg 420x200x230cm 2x Klappe Planendreieck Hochlader
Zevenbergen MazakIntegrex 200-lV ST
Rosmalen BIESSERover A 1343 ATS (5-Axis)
Berlin CoiltecCOMPACT FEEDER CMKS H3
Toruń HOMAGEDGETEQ S-500 KAL375 AT
Wijchen MorbidelliM100
Nattheim SCMStartech CN
Juszczyn WEINIGPowermat 500
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.