Mesin pembalut pinggirHOMAG
KAL 310/10/A3/S2
Data mesin
- Nama mesin:
- Mesin pembalut pinggir
- Pengeluar:
- HOMAG
- Model:
- KAL 310/10/A3/S2
- Tahun pembuatan:
- 2008
- Keadaan:
- tidak diuji (terpakai)
- Fungsi:
- belum diuji
Butiran teknikal
- Ketebalan tepi (maks.):
- 3 mm
- Kadar suapan paksi-X:
- 25 m/min
- Kelajuan putaran (maks.):
- 12,000 rpm
penyediaan
- Lokasi:
- Piemonte, Itali
– Jarak: lebih kurang 10,022 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€850.00 (wajib)
percuma
Penerangan
TECHNICAL DETAILS
Minimum edge thickness: 0.3 mm
Maximum edge thickness: 3 mm
Maximum feed speed: 25 m/min
MACHINE DETAILS
Edge processing unit 1
Unit: End trimming
Model: WK13
No. of motors: 2
Motor power: 0.4 kW
Max. speed: 12,000 rpm
Edge processing unit 2
Unit: Top milling
No. of motors: 2
Motor power: 0.55 kW
Max. speed: 12,000 rpm
Edge processing unit 3
Unit: Multifunction
Model: FK13
No. of motors: 2
Automatic tool changer
with NC positioning
Motor power: 0.4 kW
Max. speed: 12,000 rpm
Edge processing unit 4
Unit: Top milling
Model: UF11
No. of motors: 1
Motor power: 4 kW
Max. speed: 9,000 rpm
Edge processing unit 5
Unit: Edge scraper
Model: MN21
with NC positioning
Edge processing unit 6
Unit: Glue scraper
Model: FA11
Edge processing unit 7
Unit: Brush
No. of motors: 2
Motor power: 0.25 kW
Edge processing unit 8
Unit: Brush
No. of motors: 2
Motor power: 0.25 kW
Total installed power: 35 kW"
EQUIPMENT
Spraying unit
Software for machine programming PowerControl PC22
CE marking
The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing and use of the machine at the place of destination.
External reference: 6216
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A21478177
- Nombor rujukan:
- AUC-2603169
- Kemas kini:
- terakhir pada 12.03.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Jerman SpinnerTTS65-Triplex
Władysławowo DIP TECHGlassJet NOVO
Jerman TRUMPFTruLaser 3030 L20
Jerman Holz-HerAuriga 1308 XL
Jerman SpinnerTTS 65-DUPLEX
Borken Siemens440 6SE6440-2UE35-5FA1 6SE64402UE355FA1
Satu Mare BDTronic / B5600 / KnödelB 5600
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.