Pusat pemesinanHOMAG
BAZ 321/50/PM
Pusat pemesinan
HOMAG
BAZ 321/50/PM
Tahun pembuatan
2000
Keadaan
Terpakai
(berfungsi sepenuhnya)
Lokasi
Bayern 

Pantau lelong
Data asas
- Nama mesin:
- Pusat pemesinan
- Pengeluar:
- HOMAG
- Model:
- BAZ 321/50/PM
- Nombor mesin:
- 0-201-22-3325
- Tahun pembuatan:
- 2000
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
Spindel
Kelajuan gelendong (maks.):
18,000 rpm
Bahan/produk boleh diproses
Panjang benda kerja (maksimum):
5,800 mm
Lebar benda kerja (maks.):
1,200 mm
Spesifikasi gandar
Kadar suapan paksi-X:
80 m/min
Maklumat lanjut
Model pengawal:
Homatic-CNC System PC83 mit Windows NT 4.0
penyediaan
- Lokasi:
- Bayern, Jerman
– Jarak: lebih kurang 9,752 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
Kos lepas pasang & kos memuatkan:
€500.00 (wajib)
€500.00 (wajib)
Pengambilan di lokasi:
percuma
percuma
Kos penghantaran:
Penerangan
No minimum price – guaranteed sale to the highest bidder!
Bidding obligates the buyer to collect the machine on 20/03/2026!
4-axis CNC machining center for drilling, milling, edge banding, and finishing:
- Saw and crosscutting unit for tool changer
- Drilling and milling unit (4 spindles) for tool changer
- Combination flush-trimming and finishing unit for tool changer
- Blow-off nozzle for workpiece edge, compatible with tool changer
Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery!
Itjdpfeyic Tuox Adlsp
TECHNICAL DETAILS
Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy
- Max. workpiece length (single occupancy): 5,800 mm
- Max. workpiece length (pendulum mode): 2,200 mm
- Max. workpiece width: 1,200 mm
- Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1)
- Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm
- Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2)
Support equipment
- Drilling head: 17 vertical spindles
- 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer)
- Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections
- Electronic supply and swivel drive
- C-axis: swivel range without limitation
Edge banding unit, 360°, for insertion into right main spindle
- Max. edge height: 65 mm
- Pickup station right, for depositing edge banding modules
- Pre-cutting station and 3-position roller magazine
Adapter units
- Combination flush-/radius trimming and finishing unit (profile scraper knife)
- Saw and crosscutting unit
- 4-spindle drilling/milling unit (crosshead)
- Blow-off nozzle for workpiece edge
MACHINE DETAILS
- Control: HOMATIC control PC 83 with Windows interface (NT 4.0)
EQUIPMENT
- WOODWOP programming system, version 5.0
- Network connection
- Laser positioning aid
- Chip conveyor
- Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation
Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Bidding obligates the buyer to collect the machine on 20/03/2026!
4-axis CNC machining center for drilling, milling, edge banding, and finishing:
- Saw and crosscutting unit for tool changer
- Drilling and milling unit (4 spindles) for tool changer
- Combination flush-trimming and finishing unit for tool changer
- Blow-off nozzle for workpiece edge, compatible with tool changer
Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery!
Itjdpfeyic Tuox Adlsp
TECHNICAL DETAILS
Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy
- Max. workpiece length (single occupancy): 5,800 mm
- Max. workpiece length (pendulum mode): 2,200 mm
- Max. workpiece width: 1,200 mm
- Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1)
- Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm
- Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2)
Support equipment
- Drilling head: 17 vertical spindles
- 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer)
- Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections
- Electronic supply and swivel drive
- C-axis: swivel range without limitation
Edge banding unit, 360°, for insertion into right main spindle
- Max. edge height: 65 mm
- Pickup station right, for depositing edge banding modules
- Pre-cutting station and 3-position roller magazine
Adapter units
- Combination flush-/radius trimming and finishing unit (profile scraper knife)
- Saw and crosscutting unit
- 4-spindle drilling/milling unit (crosshead)
- Blow-off nozzle for workpiece edge
MACHINE DETAILS
- Control: HOMATIC control PC 83 with Windows interface (NT 4.0)
EQUIPMENT
- WOODWOP programming system, version 5.0
- Network connection
- Laser positioning aid
- Chip conveyor
- Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation
Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Jenis pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A21203920
- Nombor rujukan:
- AUC-2602102
- Kemas kini:
- terakhir pada 12.02.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Boleh dilihat
Mesin sedang dialiri arus listrik
Machineseeker mengesyorkan supaya mesin diperiksa terlebih dahulu secara amnya.
Semua maklumat diberikan mengikut pengetahuan dan niat baik terbaik – sila sahkan sendiri di lokasi.
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Władysławowo
9,160 km
Mesin cetak digital
DIP TECHGlassJet NOVO
DIP TECHGlassJet NOVO
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Berlin
9,556 km
Sistem pematerian terpilih
SehoPower Selective PO SEL
SehoPower Selective PO SEL
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Szczecin
9,472 km
Pencetak digital untuk kaca
Dip-TechGlassJet AR6000
Dip-TechGlassJet AR6000
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Roreto
10,017 km
MESIN INSERTING BORING AUTOMATIK
WEEKE (HOMAG Group)PROFI BST 800
WEEKE (HOMAG Group)PROFI BST 800
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Austria
9,703 km
Mesin penggilingan - sejagat
SIXIS
SIXIS
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Wiefelstede
9,900 km
Pengepam sampah dalam kontena
KUKA13N 295
KUKA13N 295
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Achern
9,956 km
Permohonan pelekat bagi sambungan jari
OEST1K PUR Kammbeleimung
OEST1K PUR Kammbeleimung
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Jerman
9,760 km
Pusat kerja kayu CNC
HomagPROFI BMG512/74/15/F/A
HomagPROFI BMG512/74/15/F/A
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Nattheim
9,794 km
Mesin pengikat tepi dengan penyambung
StefaniSolution XD
StefaniSolution XD
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Barntrup
9,841 km
Mesin penyusun venir melintang yang padat
KuperACR CrossRunner 1600
KuperACR CrossRunner 1600
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Iklan anda telah berjaya dipadamkan
Berlaku ralat








































































































































