Mesin pembalut pinggirHOLZ-HER
Sprint 1329 Premium Edition 18
Data mesin
- Nama mesin:
- Mesin pembalut pinggir
- Pengeluar:
- HOLZ-HER
- Nombor mesin:
- 974/1-810
- Tahun pembuatan:
- 2018
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 1,483 h
Butiran teknikal
- Ketinggian benda kerja (maks.):
- 60 mm
- Kadar suapan paksi-X:
- 18 m/min
- Model pengawal:
- Edge Control 19 mit 18,5" Touchscreen
penyediaan
- Lokasi:
- Bayern, Jerman
– Jarak: lebih kurang 9,695 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- EXW
percuma
Penerangan
The machine was last serviced in February 2026 and will remain powered until 05.08.2026!
The machine has the following configuration:
Jointing Milling Unit 1802
Motor power: 2 x 2.0 kW
1st cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for jointing milling unit
2nd cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for jointing milling unit
Edge Feeding 1901 SYNCHRO (fully automatic)
Glue Application Station Glu Jet GJ301 (automatic)
Performance: 2.3 kW, 50 Hz
Cartridges: storage chute for 14 cartridges (1.4 kg)
GluJet Collection Container
Pressure Section 1913 MOT
End Trimming Unit 1918 (60 mm) pneumatic
Multi-Function Milling Unit 1826 MOT4
Motor power: 2 x 0.65 kW
Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm left-hand rotation
Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm right-hand rotation
Profile Milling Unit 1833 MOT4
1st cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2 mm, left-hand rotation with CM technology
2nd cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2 mm, right-hand rotation with CM technology
Scraper Unit 1929 MOT4
HW reversible knives for scraper holder R = 2 mm (2 pcs. required)
Flat Scraper FK 701
Buffing Unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm)
Spray Device 1856
TECHNICAL DETAILS
Feed speed: 10 - 18 m/min
Minimum workpiece length: 160 mm
Minimum workpiece width: 60 mm
Workpiece thickness: 8 - 60 mm
Max. edge height: 65 mm
Edge thickness roll material: 0.4 - 3 mm
Edge thickness strip material max.: 8 mm
MACHINE DETAILS
Control: Edge Control 19 with 18.5" touchscreen
Infeed fence length: 1,350 mm
Electrics for stepless feed: 400 V / 50 Hz
Electromotor feed: 2.2 kW
Operating hours: 1,483 h
EQUIPMENT
Motorized pressure bridge adjustment
Nesting – top & bottom vertical sensor shoe
Edition 18 package
ECO MODE energy-saving mode
ITronic system
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22483822
- Nombor rujukan:
- AUC-2607303
- Kemas kini:
- terakhir pada 03.08.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Wiefelstede EWMGW62
Wijchen SCMOlimpic K 560 HP T ER 2
Gratwein-Straßengel HOLZ-HERACCURA 1558 Performance
Coevorden AORETR12069 Tube + profile
Saerbeck WeekeBHX 500
Przemyśl TETRA PAK CAP30 1000 HELICAP23 PRO V400APPLICATOR YOM 2019 NEW CONDITION
Wijchen MorbidelliM100
Gerolzhofen ALTENDORFF45
Zevenbergen MazakIntegrex 200-lV ST
Jerman HOLZMAPROFI HPP/380/43/43/NEW
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.