Pusat pemesinanHOLZ-HER
DYNESTIC 7535
Pusat pemesinan
HOLZ-HER
DYNESTIC 7535
Tahun pembuatan
2023
Keadaan
mesin pameran
(berfungsi sepenuhnya)
Lokasi
Wetherill Park 

Data asas
- Nama mesin:
- Pusat pemesinan
- Pengeluar:
- HOLZ-HER
- Model:
- DYNESTIC 7535
- Tahun pembuatan:
- 2023
- Keadaan:
- seperti baru (mesin pameran)
- Fungsi:
- berfungsi sepenuhnya
Harga & Lokasi
- Lokasi:
- 3 Widemere Rd, Wetherill Park NSW 2164, Australien

Hubungi
Butiran tawaran
- ID iklan:
- A22857370
- Nombor rujukan:
- 578748/3 - #331
- Kemas kini:
- terakhir pada 01.10.2026
Penerangan
Holz-Her 5-Axis Nesting Machining Center DYNESTIC 7535 LIFT
ATTENTION: The machine is located in Sydney / Australia!
Nesting with lifting table + labeling station + pusher conveyor, including a manual labeling station for small parts.
Machining area: 3700 x 2200 mm.
The milling spindle has a power of 13.0 kW / 18 HP (S6) and accepts tools with a maximum diameter of 350 mm via an HSK interface.
Drilling with 24 spindles, 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head has an integrated sawing unit for a saw blade with a maximum diameter of 125 mm and a maximum width of 4 mm.
18-position tool changer, pneumatically liftable, with a cover to protect the HSK 63F collet, as well as a 1-position pick-up changer for saw blades with a maximum diameter of 350 mm.
Iedpfx Adoz Hvy Ijlotp
Pneumatic stops, which can be recessed into the table, for special machining operations on the nesting table, or also with vacuum suction cups.
1000 m³/h vacuum capacity via VariAir pump (frequency-controlled).
To be able to use the vacuum capacity in a concentrated manner, the table has a 16-zone vacuum system.
Power Label above the lifting table for panels up to X=4200 x Y=2200 mm.
Touch Label Light - extra label printer under the operator screen for labeling small parts.
The pre-installed pusher unit is connected to the extraction system and can clean the panels and the nesting table.
Overhead laser for complex contours (laser color green).
Screen: 21.5'' / 16:9 touch screen
Software: 1x Campus V7 (machine) + 1x Campus V7 (office), including high-speed curve and 5-axis simultaneous milling.
Barcode scanner
Touch Tool - tool length measurement
Cold Gun - tool cooling
Delivery, installation, and training for the machine can be carried out directly by us for an additional charge.
The machine is currently located at our branch in Sydney / Australia.
In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding.
Our general terms and conditions can be found on our website at holzher.de/de/agb.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
ATTENTION: The machine is located in Sydney / Australia!
Nesting with lifting table + labeling station + pusher conveyor, including a manual labeling station for small parts.
Machining area: 3700 x 2200 mm.
The milling spindle has a power of 13.0 kW / 18 HP (S6) and accepts tools with a maximum diameter of 350 mm via an HSK interface.
Drilling with 24 spindles, 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head has an integrated sawing unit for a saw blade with a maximum diameter of 125 mm and a maximum width of 4 mm.
18-position tool changer, pneumatically liftable, with a cover to protect the HSK 63F collet, as well as a 1-position pick-up changer for saw blades with a maximum diameter of 350 mm.
Iedpfx Adoz Hvy Ijlotp
Pneumatic stops, which can be recessed into the table, for special machining operations on the nesting table, or also with vacuum suction cups.
1000 m³/h vacuum capacity via VariAir pump (frequency-controlled).
To be able to use the vacuum capacity in a concentrated manner, the table has a 16-zone vacuum system.
Power Label above the lifting table for panels up to X=4200 x Y=2200 mm.
Touch Label Light - extra label printer under the operator screen for labeling small parts.
The pre-installed pusher unit is connected to the extraction system and can clean the panels and the nesting table.
Overhead laser for complex contours (laser color green).
Screen: 21.5'' / 16:9 touch screen
Software: 1x Campus V7 (machine) + 1x Campus V7 (office), including high-speed curve and 5-axis simultaneous milling.
Barcode scanner
Touch Tool - tool length measurement
Cold Gun - tool cooling
Delivery, installation, and training for the machine can be carried out directly by us for an additional charge.
The machine is currently located at our branch in Sydney / Australia.
In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding.
Our general terms and conditions can be found on our website at holzher.de/de/agb.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Kali terakhir dalam talian: Semalam
Didaftarkan sejak: 2010
4 Iklan dalam talian
Hantar permintaan
Telefon & Faks
+49 7022 ... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Jerman
9,951 km
Pusat pemesinan CNC dengan storan plat
Holz-HerDynestic 7535 mit Store-Master 5110
Holz-HerDynestic 7535 mit Store-Master 5110
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Bitburg
10,048 km
Pusat pemesinan - sedia serta-merta -
Biesse Ausstellung -Rover Multi Up M C S
Biesse Ausstellung -Rover Multi Up M C S
Berjaya
Mesej anda telah dihantar.
Iklan kecil
United Kingdom
9,967 km
HOLZHER Dynestic 7535
HOLZ-HERDynestic 7535
HOLZ-HERDynestic 7535
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Landsberg
9,753 km
Treler separuh rendah
FAYMONVILLEPlateauauflieger MAX200-N-3A-13.60-19.5-2.54
FAYMONVILLEPlateauauflieger MAX200-N-3A-13.60-19.5-2.54
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Barntrup
9,844 km
Pusat Pemesinan CNC SCM Morbidelli N100 22-31 PROSPACE (2022)
SCMMorbidelli N100 22-31 PROSPACE
SCMMorbidelli N100 22-31 PROSPACE
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Dötlingen
9,884 km
Mesin pengisar CNC 5-paksi dengan 24 alat
COSMEC 5-Achsen CNC-FräseCONQUEST 515
COSMEC 5-Achsen CNC-FräseCONQUEST 515
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Egenhofen
9,730 km
Pengekstrak habuk mudah alih
HolzkraftZAA 2863 AF
HolzkraftZAA 2863 AF
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Österreich
9,480 km
Mesin pembalut pinggir
HOMAGEDGETEQ S-380 / KDF 650 C
HOMAGEDGETEQ S-380 / KDF 650 C
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Jerman
9,854 km
Mesin pengikat tepi dengan penyambung
BiesseRoxyl 4.5
BiesseRoxyl 4.5
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Tiszakécske
9,063 km
Pusat pemesinan
HOMAGCENTATEQ P-110
HOMAGCENTATEQ P-110
Iklan anda telah berjaya dipadamkan
Berlaku ralat
































































































































