Tekan pelurusHidrogarne
TL 100/10000E
Tekan pelurus
Hidrogarne
TL 100/10000E
Keadaan
Terpakai
Lokasi
Bellpuig 

Gambar menunjukkan
Tunjukkan peta
Data mesin
- Nama mesin:
- Tekan pelurus
- pengeluar:
- Hidrogarne
- Model:
- TL 100/10000E
- Keadaan:
- hampir baru (terpakai)
- fungsi:
- berfungsi sepenuhnya
Harga & Lokasi
- Lokasi:
- Hostal Nou, 2, 25250 Bellpuig,Spanien
Hubungi
Butiran teknikal
- Jumlah ketinggian:
- 2,900 mm
- Panjang meja:
- 10,000 mm
- Lebar keseluruhan:
- 3,660 mm
- Jumlah panjang:
- 10,200 mm
- Ketinggian meja:
- 900 mm
- Lebar meja:
- 2,545 mm
- Daya penekanan:
- 100 t
- Berat keseluruhan:
- 26,000 kg
- Kelajuan operasi:
- 9 mm/s
- Kelajuan undur:
- 14 mm/s
- Tekanan:
- 320 palang
- Kuasa:
- 4 kW (5.44 kuasa kuda)
Butiran tawaran
- ID iklan:
- A19154251
- Nombor rujukan:
- TL-100/10000E
- kemas kini:
- terakhir pada 13.10.2025
Penerangan
MOBILE HYDRAULIC GANTRY PRESS WITH MOVABLE HEAD AND 10-METER LONG TABLE FOR STRAIGHTENING WELDED STRUCTURES AND CUT PLATES
TECHNICAL DATA
Force T 100
Motor power kW 4
Motor ventilation switch power kW 0.37
Bridge travel motor power kW 0.75
Working speed mm/s 3
Approach speed mm/s 9.2
Return speed mm/s 14.4
Max. pressure Bar 320
Working area mm 10,000 x 2,545
Ijdpfx Abswkvmneyjbc
Ram stroke max. mm 450
Maximum open height mm 600
Lateral travel mm 2,120
Gantry travel mm 9,140
Working height mm 900
Total length mm 10,200
Total width mm 3,660
Height mm 2,900
Weight kg 26,000
The hydraulic press TL-100/10000E belongs to the T/NC series and has been specially developed for straightening welded structures and cut plates. As with all hydraulic presses in this series, its design facilitates the loading and unloading of large workpieces. Thanks to the lateral movement of the cylinder and the longitudinal travel of the bridge, access to various pressing points is possible without having to reposition the workpiece. The machine complies with all essential safety and health requirements in accordance with CE regulations.
STRUCTURE AND TABLE
• Electrically welded structure made exclusively from S355JR steel.
• Stabilized and machined after welding to ensure perfect parallelism and precision.
• Calculated and designed using finite element software.
• Longitudinal bridge travel achieved by frequency inverter and toothed belt.
• Motorized lateral head movement.
CYLINDER AND HYDRAULIC UNIT
• Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free wear-resistant guides.
• Fitted with a removable and exchangeable pad to prevent piston wear and machined at the end to match the tool.
• Includes standard anti-rotation device for the cylinder and a calibrated front end with limit switches for stroke adjustment.
• Motorized hydraulic unit with two speeds and automatic cut-off for rapid speed.
• Cylinder decompression valve.
• Pressure regulator.
• Glycerin pressure gauge with tonnage indicator.
ELECTRICAL INSTALLATION AND SAFETY
• The control panel includes a selector switch for manual or semi-automatic operation.
• Selector switch for choosing between rapid approach speed and slow working speed.
• Operation via pendant control with emergency stop and low-voltage control.
• Includes button to confirm a cycle.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
TECHNICAL DATA
Force T 100
Motor power kW 4
Motor ventilation switch power kW 0.37
Bridge travel motor power kW 0.75
Working speed mm/s 3
Approach speed mm/s 9.2
Return speed mm/s 14.4
Max. pressure Bar 320
Working area mm 10,000 x 2,545
Ijdpfx Abswkvmneyjbc
Ram stroke max. mm 450
Maximum open height mm 600
Lateral travel mm 2,120
Gantry travel mm 9,140
Working height mm 900
Total length mm 10,200
Total width mm 3,660
Height mm 2,900
Weight kg 26,000
The hydraulic press TL-100/10000E belongs to the T/NC series and has been specially developed for straightening welded structures and cut plates. As with all hydraulic presses in this series, its design facilitates the loading and unloading of large workpieces. Thanks to the lateral movement of the cylinder and the longitudinal travel of the bridge, access to various pressing points is possible without having to reposition the workpiece. The machine complies with all essential safety and health requirements in accordance with CE regulations.
STRUCTURE AND TABLE
• Electrically welded structure made exclusively from S355JR steel.
• Stabilized and machined after welding to ensure perfect parallelism and precision.
• Calculated and designed using finite element software.
• Longitudinal bridge travel achieved by frequency inverter and toothed belt.
• Motorized lateral head movement.
CYLINDER AND HYDRAULIC UNIT
• Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free wear-resistant guides.
• Fitted with a removable and exchangeable pad to prevent piston wear and machined at the end to match the tool.
• Includes standard anti-rotation device for the cylinder and a calibrated front end with limit switches for stroke adjustment.
• Motorized hydraulic unit with two speeds and automatic cut-off for rapid speed.
• Cylinder decompression valve.
• Pressure regulator.
• Glycerin pressure gauge with tonnage indicator.
ELECTRICAL INSTALLATION AND SAFETY
• The control panel includes a selector switch for manual or semi-automatic operation.
• Selector switch for choosing between rapid approach speed and slow working speed.
• Operation via pendant control with emergency stop and low-voltage control.
• Includes button to confirm a cycle.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2025
Hantar permintaan
Telefon & Faks
+34 973 3... iklan
Iklan anda telah berjaya dipadamkan
Berlaku ralat