Pusat pemesinan menegakHERMLE
U 1130
Pusat pemesinan menegak
HERMLE
U 1130
Tahun pembuatan
2005
Keadaan
Terpakai
(berfungsi sepenuhnya)
Lokasi
Westhausen 

Data asas
- Nama mesin:
- Pusat pemesinan menegak
- Pengeluar:
- HERMLE
- Model:
- U 1130
- Tahun pembuatan:
- 2005
- Keadaan:
- baik (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 11,714 h
Harga & Lokasi
- Lokasi:
- Industriestr. 11, 73463 Westhausen, Deutschland

Hubungi
Butiran teknikal
Dimensi dan berat
Berat keseluruhan:
8,500 kg
Ketinggian meja:
1,300 mm
Lebar meja:
720 mm
Spindel
Kuasa motor gelendong:
32 W
Bilangan gelendong:
1
Kelajuan spindel (min.):
12,000 rpm
Jam operasi spindle:
11,082 h
Magazin alat
Bilangan slot dalam majalah alat:
28
Peralatan
Penyampai serpihan
Dokumentasi dan pensijilan
Dokumentasi / manual
Penyejukan
Bekalan pendingin:
40 palang
Spesifikasi gandar
Jarak gerakan paksi X:
1,300 mm
Jarak perjalanan paksi-Y:
720 mm
Butiran tawaran
- ID iklan:
- A22883595
- Kemas kini:
- terakhir pada 19.11.2026
Penerangan
This HERMLE U1130 universal machining center was manufactured in Germany in 2005 and has been in operation for 35,264 hours, of which only 11,082 are spindle hours. Equipped with a Heidenhain TNC 520 control, this machine features the integration of 5 axes and an NC rotary table. It offers excellent operating conditions.
Additional Information
Machine Advantages
5-axis simultaneous operation
Qualitative Machine Advantages
Very good condition
Spindle operating hours: 11,082
Technical Machine Advantages
Internal cooling: 40 bar
Integrated NC rotary table
Blum laser measurement
Without the vises shown in the pictures
Isdpsz Inknofx Appstp
Robust block construction with 3-point support using proven mineral cast technology
CNC-controlled B-axis +5° / -95° pivoting with hydraulic clamping
Manually +5° / -95° pivoting main spindle with digital display in the control
Motor spindle technology with overrun protection
Speed of 12,000 and a torque of 200 Nm
Large X-axis travel: 1130 / 1300* mm
Rapid traverse rates up to 30 m/min
Acceleration up to 4 m/s2
Max. table load up to 1000 kg
Fully enclosed work area
Control panel can be swiveled from the operating position to the tool loading/unloading station
The highlight: the main spindle
Main Spindle
Overrun protection with collision detection
Water-cooled AC spindle motors as hollow shaft motors
Speed up to 12,000 1/min
Media supply of air, coolant, or minimum quantity lubrication, individually or in combination, through the spindle or from the outside
Main spindle rigid or as a B-axis -5° to +95° continuously adjustable manually (digital display) or CNC-controlled
Technical Data
X-axis travel: 1130 mm
X-axis: 1300 mm*
Y-axis travel: 720 mm
Z-axis travel: 630 mm
Rapid Traverse Rates
Rapid traverse rate linear X-Y axis: 30 m/min
Rapid traverse rate linear Z axis: 20 m/min
Acceleration linear: 4 m/s2
Feed force X-Y axis: 6000 N
Feed force Z axis max.: 6000 N
Control
Heidenhain iTNC 530
Main Spindle
Speed 20-12000 1/min SK 40
Drive power / torque 30% ED 32 kW / 200 Nm
Table Options
Fixed table
Clamping surface: 1300 x 720 mm
Table load: 1000 kg
Integrated NC rotary table
NC rotary table integrated into a fixed table
Clamping surface fixed table: 1300 x 720 mm
Clamping surface rotary table plate: Ø 800 mm
Speed: 20 1/min
Table load: 700 kg
Disc magazine, 28 positions
Tool holder: SK 40
Max. tool length: 300 mm
Max. tool diameter: Ø 80 mm
2 magazine positions, tool diameter: Ø 125 mm
Max. tool weight: 8 kg
Max. magazine load: 112 kg
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Additional Information
Machine Advantages
5-axis simultaneous operation
Qualitative Machine Advantages
Very good condition
Spindle operating hours: 11,082
Technical Machine Advantages
Internal cooling: 40 bar
Integrated NC rotary table
Blum laser measurement
Without the vises shown in the pictures
Isdpsz Inknofx Appstp
Robust block construction with 3-point support using proven mineral cast technology
CNC-controlled B-axis +5° / -95° pivoting with hydraulic clamping
Manually +5° / -95° pivoting main spindle with digital display in the control
Motor spindle technology with overrun protection
Speed of 12,000 and a torque of 200 Nm
Large X-axis travel: 1130 / 1300* mm
Rapid traverse rates up to 30 m/min
Acceleration up to 4 m/s2
Max. table load up to 1000 kg
Fully enclosed work area
Control panel can be swiveled from the operating position to the tool loading/unloading station
The highlight: the main spindle
Main Spindle
Overrun protection with collision detection
Water-cooled AC spindle motors as hollow shaft motors
Speed up to 12,000 1/min
Media supply of air, coolant, or minimum quantity lubrication, individually or in combination, through the spindle or from the outside
Main spindle rigid or as a B-axis -5° to +95° continuously adjustable manually (digital display) or CNC-controlled
Technical Data
X-axis travel: 1130 mm
X-axis: 1300 mm*
Y-axis travel: 720 mm
Z-axis travel: 630 mm
Rapid Traverse Rates
Rapid traverse rate linear X-Y axis: 30 m/min
Rapid traverse rate linear Z axis: 20 m/min
Acceleration linear: 4 m/s2
Feed force X-Y axis: 6000 N
Feed force Z axis max.: 6000 N
Control
Heidenhain iTNC 530
Main Spindle
Speed 20-12000 1/min SK 40
Drive power / torque 30% ED 32 kW / 200 Nm
Table Options
Fixed table
Clamping surface: 1300 x 720 mm
Table load: 1000 kg
Integrated NC rotary table
NC rotary table integrated into a fixed table
Clamping surface fixed table: 1300 x 720 mm
Clamping surface rotary table plate: Ø 800 mm
Speed: 20 1/min
Table load: 700 kg
Disc magazine, 28 positions
Tool holder: SK 40
Max. tool length: 300 mm
Max. tool diameter: Ø 80 mm
2 magazine positions, tool diameter: Ø 125 mm
Max. tool weight: 8 kg
Max. magazine load: 112 kg
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2026
6 Iklan dalam talian
Hantar permintaan
Telefon & Faks
+49 7363 ... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Lelong
Tamat dalam
d
h
min
s
Lelong telah tamat
Baden-Württemberg
9,796 km
Pusat pemesinan menegak
HERMLEU 1130
HERMLEU 1130
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Eisfeld
9,733 km
Pusat pemesinan mendatar
Heller+FPT1000HF5500+FPT1000
Heller+FPT1000HF5500+FPT1000
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Saint-Genix-les-Villages
10,175 km
Pusat pemesinan FEHLMANN Picomax 56 TOP
FEHLMANNPICOMAX 56 TOP
FEHLMANNPICOMAX 56 TOP
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Viersen
10,045 km
Pusat pemusingan CNC
MonfortsRNC 500 Multiturn
MonfortsRNC 500 Multiturn
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Bienne
10,029 km
Pusat pemesinan menegak
WilleminW-508 MT
WilleminW-508 MT
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Hergensweiler
9,838 km
Meja putar kimpalan, penentu kedudukan, meja putar
Sideros,Hywema,HubdrehvorrichtungSLC 20 2 To Säulenhubdrehvorrichtung
Sideros,Hywema,HubdrehvorrichtungSLC 20 2 To Säulenhubdrehvorrichtung
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Sheffield
10,524 km
CNC komputer
Hyundai WiaL300C
Hyundai WiaL300C
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Auenwald
9,844 km
Mesin pengukur koordinat
ZEISSPrismo 7 - 9.12.7
ZEISSPrismo 7 - 9.12.7
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Fellbach
9,863 km
Bicu mesin hidraulik 10 hingga
HTS ECO-JackHTS ECO-Jack EJ100-3S
HTS ECO-JackHTS ECO-Jack EJ100-3S
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Jakling
9,459 km
Pusat pemesinan universal
SpinnerU-1520
SpinnerU-1520
Iklan anda telah berjaya dipadamkan
Berlaku ralat






















































































































