Pusat pemesinanHERMLE
C 400
Data mesin
- Nama mesin:
- Pusat pemesinan
- Pengeluar:
- HERMLE
- Model:
- C 400
- Tahun pembuatan:
- 2019
- Keadaan:
- sangat baik (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 11,832 h
Butiran teknikal
- Jarak gerakan paksi X:
- 850 mm
- Jarak perjalanan paksi-Y:
- 700 mm
- Jarak gerakan paksi Z:
- 500 mm
- Kelajuan putaran (maks.):
- 15,000 rpm
- Bilangan slot dalam majalah alat:
- 38
- Sudut putaran paksi A (min.):
- -139 °
- Sudut putaran paksi A (maks.):
- 91 °
- Sudut putar paksi C (maks.):
- 360 °
penyediaan
- Lokasi:
- Baden-Württemberg, Jerman
– Jarak: lebih kurang 9,930 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- EXW
percuma
Penerangan
TECHNICAL DETAILS
X-axistravel : 850 mm
Y-axis travel: 700 mm
Z-axis travel: 500 mm
Controltype: Heidenhain TNC 640
Rapid traverse linearXYZ: 35 - 35 - 35 m/min
Acceleration linearXYZ: 6 m/s²
Feed force linearXYZ: 7,000 N
jaw widthmax.: 625 mm
workpiece dimensions
Max. diameter: Ø 650 mm
Height max.: 500 mm
Interference circle (A-axis) in 0° position: Ø 885 mm
spindle data
Speed: 15,000 rpm
Power/torque: 20% ED, 20 kW / 173 Nm
Tool holder: SK 40
tool interface
Type: SK 40
Magazine slots: 38 pieces
Chip-to-chip time: approx. 6 s
Tool length: max. 300 mm
Tool diameterfor adjacent space occupancy: Ø 80 mm
Tool diameter without adjacent space occupancy: Ø 125 mm
Tool weight: max. 8 kg
Magazine load: max. 152 kg
swivel rotary table
clamping surface: Ø 650 x 540 mm
Swivel range: +91° / -139°
Drive type C-axis: worm
Speed of swivel axis A: 25 rpm
Speed of rotation axis C: 30 rpm
Table loadSingle-sided drive: 600 kg
accuracy according to ISO 230-2
Deviation (A in XYZ axis): ≤ 0.006 mm
cooling system (IKZ)
Standard tank capacity: 122 l
Cooling lubricant tank capacity: max. 570 l at 40 bar
Pressure: max. 40 bar
Flow rate: 11/27 l/min
Mains connection (IKZ): 400 V / 50/60 Hz
Power consumption (IKZ): up to 20 kVA
Filter: Police filter, paper band filter
operating pressure
Hydraulic pressure: 120 bar
Compressed air: 6 bar
Lubrication system: minimum quantity grease lubrication
MACHINE DETAILS
Control switch-on time: 20,178 h
Machine on-time: 19,094 h
Spindle time: 11,832 h
Weight: approx. 9.5 t
power connection
Voltage: 400 V / 50/60 Hz
Power consumption: up to 30 kVA
EQUIPMENT
- BLUM measuring probe
- BLUM tool laser measurement
- Pull-out chip drawer
- swivel rotary table
- chip flushing gun
- emulsion mist extraction
- scraper belt conveyor
- blow-off device
- Blowing air through the spindle center
- Manual cabin door
- Manual cabin roof
- Polycarbonate safety windows
- Electrical heat compensation from Heidenhain.
- Electric hand control module from Heidenhain.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A18445421
- Nombor rujukan:
- AUC-2501219
- Kemas kini:
- terakhir pada 05.02.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Aach HermleC 400 U
Gemmingen NS MaquinasDM 1100 C
Baden-Württemberg HERMLEC 400
Waldlaubersheim TRUMPFTruLaser 3030 L49 4KW Fiber
Leganés MAKINOD500
Nové Zámky TRUMPFTruLaser 3030 with load master
Oestrich-Winkel SpinnerTC 800 - 85 MCY
Contamine-sur-Arve HERMLEU_740
Burgos CorreaBRAVA-30
Jerman HAINBUCH
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.