Mesin pembalut pinggirHEBROCK
AKV DK-F
Data mesin
- Nama mesin:
- Mesin pembalut pinggir
- Pengeluar:
- HEBROCK
- Model:
- AKV DK-F
- Tahun pembuatan:
- 2014
- Keadaan:
- terpakai
Butiran teknikal
- Kuasa:
- 12 kW (16.32 kuasa kuda)
- Ketebalan tepi (maks.):
- 8 mm
- Kadar suapan paksi-X:
- 10 m/min
- Ketinggian plat:
- 40 mm
- Peralatan:
- Penandaan CE
penyediaan
- Lokasi:
- Nitriansky kraj, Slovakia
– Jarak: lebih kurang 9,218 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€500.00 (wajib)
percuma
Penerangan
No minimum price - guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Feed rate max.: 10 m/min
Workpiece height max.: 40 mm
Workpiece length min.: 200 mm
Workpiece width min.: 80 mm
Edge thickness min.: 0.3 mm
Edge thickness max.: 8 mm
Number of processing units: 5
Number of panel dividing/milling units: 1
Number of edge processing units: 4
Adhesive system: EVA hot melt adhesive
The machine consists of the following processing units:
Panel dividing/milling unit
Unit: Pre-milling unit
Edge processing unit 1
Processing unit: Capping
Number of motors: 1
Edge processing unit 2
Processing unit: Fine milling for flush trimming and rounding
Number of motors: 2
Edge processing unit 3
Processing unit: Corner rounding
Number of motors: 1
Edge processing unit 4
Processing unit: Glue application roller
MACHINE DETAILS
Total installed power: 12 kW
EQUIPMENT
CE marking
Pressure bar
Pressure with idler rollers
Panel support guides
Edge roller magazine
Adhesive pot for EVA hot melt adhesive
Infeed roller for pressing the edge
4 pressure rollers
Corner rounding unit
The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination.
External reference: 8570
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22177917
- Nombor rujukan:
- AUC-2606239
- Kemas kini:
- terakhir pada 24.06.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Nitriansky kraj BIESSEWNTR 650 TP
Nitriansky kraj MINIMAX T55 ELITE S
Nitriansky kraj GRIGGIOSNA 700
Nitriansky kraj JAROMADFC.B
Nitriansky kraj REMAFX 450
Nitriansky kraj HEBROCKF2
Nitriansky kraj BIESSESKIPPER 130
Nitriansky kraj JAROMADFC.B
Nitriansky kraj BIESSEWNT 650
Nattheim HebrockAKV 3006 DK-F
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.