Wap alkohol mesin cetak mengimbangi 2-C

Hashimoto (Japan) Impulse F-522

2-colour offset press in high-quality construction with hardened and ground gears, cylinders run in class P5 pre-stressed conical roller bearings (sets of 2) and lubricated in oil bath and pressure lubrication.
B3 format (35x50 cm) in conventional standard design (no autoplate and/or cocking) but alcohol film dampening with large rollers according to SM52 construction, prints very nicely
Originating from 1st owner who did not maintain the machine properly (visually); an extensive maintenance history has been carried out by the importer. The last counter reading in the history is 11.6 Mln from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then.
We will check the machine on the current counter reading and ensure correct and proper operation. C)2 dry ice cleaning is still being considered as well as overhauling the entire machine, because the mechanical condition is exceptionally good. This is however cost increasing so the machine is now offered for the cheapest option, that is "as it is", EXW our warehouse in Son, NL.
Any type of inspection is of course allowed.
We guarantee the machine as free from breakage, cylinder damage and/or repair and damage free to gears.
The rubber rollers are vitrified and need to be replaced.
The Royce ECO circulation and cooling installation for the dampening work shows signs of corrosion.

Some specs, for all specs open the PDF at the bottom of this page.
Maximum printing speed 12,000 sheets per hour
Maximum paper size 365 x 520 mm
Minimum paper size 100 x 148 mm or 148 x 100 mm
Maximum printing surface 350 x 510 mm
Rubber cloth size 500 x 520 x 1.9 mm
Plate size 400 - 410 x 510 mm
Dampening rollers in this case of film dampening is 1 (62mm)
Lhsdsv Nv Taspfx Ag Dsf
Number of ink feed rollers 4 pieces of 46, 48, 52 and 54 mm
Inlay stack height maximum 850 mm
Explanation stack height max 360 mm
Electrical connection 3 phases 200 VAC 50HZ (primary) but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC
Power consumption in total 7kW
Primary fuse in any case 20A
Dimensions LxWxH = 2765 x 1523 x 1560 mm
Net weight 4000 kg

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.