Swiss-type automatic lathe with deep-hole drilling unit

HANWHA XD 38II-R Tiefbohreinheit

MAIN SPINDLE
Maximum turning diameter: 38 mm
Max. spindle bore diameter: 40 mm
Maximum speed [rpm]: 6,500
Maximum power [kW]: 23 (76 Nm)
C-axis with 0.001°
Stroke Z1 [mm]: Long-bed lathe version 320 mm,
Short-bed lathe version 120 mm
Synchronously rotating guide bushing unit
Type of guide bushing: BRA 42 (FBritsch)
Type of chuck: 173E

TAILSTOCK
Maximum speed [rpm]: 6,500
Maximum power [kW]: 23 (76 Nm)
Maximum workpiece diameter [mm]: 38
Max. workpiece length, push-out forward [mm]: 90
C-axis with 0.001°
Stroke Z2 [mm]: 350
Type of chuck: 171E / 173 E
TOOLING OPTIONS
Tool slide X1, Y1:
- Tool holder plate for 5 external turning tools 2x20x20mm, 3x 16x16
Cross drilling / milling unit:
- Number: 5 driven drilling/milling spindles 3 x ER16 + 2 x ER20
- Power: [kW]: 2.13 (S6000)
- Front drilling unit for 5 drilling spindles, diameter 32 mm
--> not applicable with option B-axis 6 AGW!!!
Cross slide tailstock
- optional deep hole drilling adapter
- 2 driven drilling/milling spindles ER16 modular

Rear-end machining
Y2 axis
- 4 driven drilling/milling spindles ER16 modular (S6000) kW=1.02
- 4 fixed drilling/milling spindles ER16 modular
- Option 8 driven drilling/milling spindles ER16 modular
AXES AND CONNECTED LOAD
Number of servo axes: 6
Number of spindle axes: 2
Rapid traverse rate m/min: 32 m/min (Z1, Z2, Y, X2, Y2); 24 m/min (X1)
Connected load [kW]: 40kVA

CONTROL
Control type: Siemens 828 D SL
Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2)
Simultaneous 4-axis control
External control panel with handwheel
10.4" color monitor LCD/MDI
Automatic PowerOff function
Program check function (test run via handwheel possible)
Continuous threading cycle
Runtime display / part counter
CF card interface
Tool radius compensation
Absolute reference point
Self-diagnosis function
ACCESSORIES
Leveling feet with leveling elements
Toolbox and service tool set
LED work area light
Signal lamp (3-color)
Safety door switch with interlock
Maintenance and central lubrication unit (1.8 liter
lubricant volume)
Coolant flow monitoring
Pneumatic blowing device for tailstock chuck
Manual and documentation in German and English
(Maintenance and operating instructions incl. parameter list and test report)
Convertible to short-bed lathe

incl. deep drilling unit max. drilling length 300 mm.
The deep drilling unit has a separate motor max. 6,000 rpm.
Bwodpfo Ah Dtdjx Apmjw

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.