Pusat pemesinan menegakHAAS
VF-1
Data asas
- Nama mesin:
- Pusat pemesinan menegak
- Pengeluar:
- HAAS
- Model:
- VF-1
- Tahun pembuatan:
- 2013
- Keadaan:
- terpakai
Butiran teknikal
Spindel
Peralatan
Spesifikasi gandar
penyediaan
- Lokasi:
- Steiermark, Austria
– Jarak: lebih kurang 9,461 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
TECHNICAL DETAILS
X-axis travel: 508 mm
Y-axis travel: 406 mm
Z-axis travel: 508 mm
Distance spindle nose – machine table: max. 610 mm
Distance spindle nose – machine table: min. 102 mm
Rated power: max. 22.4 kW
Torque: max. 122.0 N·m at 2,000 rpm
Torque with optional gearbox: max. 339 N·m at 450 rpm
Spindle design: metric
Spindle taper: SK40
Spindle speed: 15,000 rpm
Table length: 660 mm
Table width: 356 mm
T-slot width: 15.90 to 16.00 mm
T-slot center distance: 125 mm
Number of T-slots (standard): 3
Table load capacity (evenly distributed): max. 1,361 kg
Feed rate during machining: max. 16.5 m/min
Rapid traverse X-axis: 25.4 m/min
Rapid traverse Y-axis: 25.4 m/min
Rapid traverse Z-axis: 25.4 m/min
Tool diameter (full): max. 89 mm
Tool weight: max. 5.4 kg
Tool-to-tool change time (average): 4.20 s
Chip-to-chip change time (average): 4.50 s
MACHINE DETAILS
Coolant tank capacity: 208 l
Input voltage AC, three-phase, low: 220 V AC
Full load current, three-phase, low: 70 A
Input voltage AC, three-phase, high: 440 V AC
Full load current, three-phase, high: 35 A
Weight: 3,539 kg
The seller estimates the operating hours at approx. 9,000 power-on hours.
EQUIPMENT
20-position tool changer
Chip conveyor
Internal coolant supply 21 bar
Coolant mist extraction system
Additional coolant filter
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22649167
- Nombor rujukan:
- AUC-2608191
- Kemas kini:
- terakhir pada 07.09.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Jerman HAASVF-1 (VCE-500)
Balaguer HAASTM-2P
Düsseldorf GildemeisterAlpha 300V3S
Jerman DMGGILDEMEISTER CTX 310
Poland HAASHAAS TM-2P
Raalte HaasTM-2P
Düsseldorf TongtaiTMV720A
Trittau IEMCAPRA 52 F
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.