Garisan untuk menyambung jari

Grecon Dimter Ultra

Grecon Dimter Ultra automatic wood joining line
Machine after major renovation.

Specification:
Tenner:
Sawheadstock:
- Spindle speed: 3000 rpm
- Saw motor power: 6 kW
- Chip extraction: Ø100 mm

Milling headstock:
- Shank diameter: Ø50 mm
- Usable shank length: 210 mm
- Max. tool diameter: Ø250 mm-Ø150 mm
- Spindle speed: 6000 rpm
- Milling motor: 15 kW / 3000 rpm
- Chip extraction: Ø150 mm

Feed table:
- Minimum board length: 150 mm
- Maximum board length: 700 mm
- Working feed: Steplessly adjustable

Dust extraction:
Chipper exhaust port diameter: Ø100 mm
Mill exhaust nozzle diameter: Ø150 mm
Dust extraction capacity (flow rate): ~2400 m3/h

Pneumatic system:
Working pressure: 6 bar
Air requirement: ~2.5 m3/h at 6 bar (15 Nm3/h)

CONTI M 6/6000 longitudinal wood joining press:
Press:
- Loaded strip width: 25 – 160 mm
- Finished strip length: approx. 6000+15-50 mm
- Pressing force: 3 – 7.5 T (3 000 – 7500 daN)

Circular saw:
- Saw diameter: Ø400 mm
- Spindle diameter: Ø30 mm
- Motor: 4 kW / 3000 rpm

Dust extraction:
- Saw exhaust nozzle diameter: Ø100 mm
- Dust extraction efficiency (flow rate): ~400 m3/h

Pneumatic installation:
- Working pressure: 6 bar
- Air demand: ~2.5 m3/h at 6 bar (15 Nm3/h)

Scope of renovation work:

1. Cleaning the machine bodies and applying new paint
2. Replacing with new bearings on: the main spindle of the tenoner; on the saw headstock of the press; linear bearings on the guide of the tenoner table carriage; bearings on the working belts.

3. Installing a new glue nozzle with a pitch of 3.8 mm on the tenoner body, installing a glue supply tank with a safety valve;
4. New conveyor belts
Gtodpfx Afsuddvaspjt
5. Replacement of wiring on machine bodies
6. Replacement of pneumatic hoses for actuators, solenoid valves and other pneumatic elements in machines with new ones;
7. Replacement of gear wheels and double-row chain on the belt-chain feeder of the press.
8. Regeneration of electromagnetic brakes on the tenoning machine
9. Replacement of seals and O-rings (repair kits) in pneumatic actuators Replacement of worn solenoid valves with new ones.
10. Replacement of graphic panels on the tenoning machine cabinet, on the press cabinet, on the small press panel with new ones.
11. Replacement of buttons, lamps and switches on panels and control boxes with new ones. Replacement of boxes with connectors with new ones.
12. Replacement of controllers supervising the operation of the tenoning machine and press with new ones. Adjustment of the machine control program to the user's needs
13. Installation of a new inverter on the press rollers and on the pusher of the receiving table projector;
14. Maintenance of electrical installations in control cabinets, modernization and preparation of electrical diagrams.
15. Installation of covers, grids and necessary descriptions, stickers and health and safety signs as well as manufacturer's logos and nameplates.
16. Replacement of V-belts with new ones, checking pulleys; gear motors and engines;
17. Replacement of limit switches, inductive and optical sensors (photocells) with new ones.

We specialize in wood joining machines.
Installation, start-up and training of employees in the scope of machine operation in Poland included in the price, in other countries for an additional fee. We provide service and access to spare parts.

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.