Pembinaan dewanGraeff
Leichtbauhalle
Pembinaan dewan
Graeff
Leichtbauhalle
VB ditambah cukai perkhidmatan
€20,000
Tahun pembuatan
2000
Keadaan
Terpakai
(fungsi terhad)
Lokasi
Frankenthal (Pfalz) 

Data asas
- Nama mesin:
- Pembinaan dewan
- Pengeluar:
- Graeff
- Model:
- Leichtbauhalle
- Tahun pembuatan:
- 2000
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- fungsi terhad
Harga & Lokasi
VB ditambah cukai perkhidmatan
€20,000
- Lokasi:
- Frankenthal, 67227 Frankenthal (Pfalz), Deutschland

Hubungi
Butiran teknikal
Dimensi dan berat
Jumlah panjang:
91,000 mm
Lebar keseluruhan:
16,000 mm
Jumlah ketinggian:
4,500 mm
Butiran tawaran
- ID iklan:
- A23327045
- Kemas kini:
- terakhir pada 18.11.2026
Penerangan
The halls are constructed from galvanized steel sheet. The vertical supports (Figure 2) are also made of double-layer galvanized sheet and are not concreted in. A strip foundation made of wood/metal was built and secured to the ground with ground anchors, onto which the hall framework was placed and screwed. (20 mm nuts)
During disassembly, unscrew the sheet metal cladding; the longitudinal beams are only clipped in. If you release the lateral, diagonal braces, you can fold the individual frames together. If the loading area is short, you can separate the frames in the middle.
We have indicated the functionality as limited. This is not entirely accurate, but it is intended to emphasize that there are also minor collision damages where the sheet metal is dented. This concerns hall 2B – 92m x 16m = 1,460 square meters.
We will be closing the site on December 31, 2026, which is why we cannot offer any guarantee or warranty. Therefore, we are selling everything as DIY material or spare parts. Until December 31, we can assist with loading using a forklift. The hall must be dismantled by the buyer!!!
Four new, electric sectional doors were installed in the hall four months ago, for which we will charge an additional 4,000.00 € (gross) each!
Iedpfo Ai Rmgsx Adrjbd
Inspections can be arranged on weekdays during normal office hours, subject to prior appointment.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
During disassembly, unscrew the sheet metal cladding; the longitudinal beams are only clipped in. If you release the lateral, diagonal braces, you can fold the individual frames together. If the loading area is short, you can separate the frames in the middle.
We have indicated the functionality as limited. This is not entirely accurate, but it is intended to emphasize that there are also minor collision damages where the sheet metal is dented. This concerns hall 2B – 92m x 16m = 1,460 square meters.
We will be closing the site on December 31, 2026, which is why we cannot offer any guarantee or warranty. Therefore, we are selling everything as DIY material or spare parts. Until December 31, we can assist with loading using a forklift. The hall must be dismantled by the buyer!!!
Four new, electric sectional doors were installed in the hall four months ago, for which we will charge an additional 4,000.00 € (gross) each!
Iedpfo Ai Rmgsx Adrjbd
Inspections can be arranged on weekdays during normal office hours, subject to prior appointment.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Kali terakhir dalam talian: minggu lepas
Didaftarkan sejak: 2026
10 Iklan dalam talian
Hantar permintaan
Telefon & Faks
+49 6122 ... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Frankenthal (Pfalz)
9,923 km
Pembinaan dewan
GraeffLeichtbauhalle
GraeffLeichtbauhalle
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Bielefeld
9,885 km
Mesin penggerek meja
WMW UNION HECKERTBFT 130/7 + TNC 145
WMW UNION HECKERTBFT 130/7 + TNC 145
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Jerman
9,624 km
Gergaji pita - menegak
MÖSSNER-REKORDSM 320
MÖSSNER-REKORDSM 320
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Nanjing
3,530 km
Alat lentur untuk Bystronic
CnstampBystronic P5 RFA Style H250mm Punch
CnstampBystronic P5 RFA Style H250mm Punch
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Debrecen
8,952 km
Mesin pengisar aci engkol
SledumRG-270
SledumRG-270
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Nattheim
9,794 km
Pusat pemesinan CNC
MorbidelliAuthor X5 44 Evo
MorbidelliAuthor X5 44 Evo
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Neuss
10,017 km
John Deere Gator 4x2 XUV855D S4
John DeereGator 4x2 XUV855D S4
John DeereGator 4x2 XUV855D S4
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Bitburg
10,048 km
Gergaji meja gelangsar
Martin - Sonderpreis -T 77 - sofort verfügbar -
Martin - Sonderpreis -T 77 - sofort verfügbar -
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Hessisch Lichtenau
9,810 km
Penyepit Abkant CNC dengan hentian belakang 6-paksi dan kawalan CYBELEC, mesin lentur tekan, mesin t
BEYELER - BYSTRONICPR 8 (2500 kN x 3100 mm)
BEYELER - BYSTRONICPR 8 (2500 kN x 3100 mm)
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Thurmaston
10,518 km
Pusat pusingan dan pengilangan CNC
DOOSANPuma 2600SY
DOOSANPuma 2600SY
Iklan anda telah berjaya dipadamkan
Berlaku ralat

























































































