Mesin membentuk gearGleason-Pfauter
GP 130 S
Data mesin
- Nama mesin:
- Mesin membentuk gear
- Pengeluar:
- Gleason-Pfauter
- Model:
- GP 130 S
- Tahun pembuatan:
- 2002
- Keadaan:
- sangat baik (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Panjang suapan paksi X:
- 230 mm
- Panjang suapan paksi Y:
- 25 mm
- Panjang hentakan paksi Z:
- 150 mm
- Diameter benda kerja (maks.):
- 300 mm
penyediaan
- Lokasi:
- Jerman
– Jarak: lebih kurang 9,933 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€500.00 (wajib)
percuma
Penerangan
TECHNICAL DETAILS
Control: Siemens 840 D
Nominal modulus in steel with approx. 600 N/mm² tensile strength: 4
Largest tooth width: 25 mm
Largest nominal diameter: 130 mm
Maximum helix angle when using 125 mm diameter cutting wheels: ± 45°
Workpiece with internal gearing
Nominal modulus in steel with approx. 600 N/mm² tensile strength: 4 mm
Largest tooth width: 25 mm
Largest swing diameter: 300 mm
Largest inner diameter: 130 mm
Tool
Maximum permissible cutting wheel diameter: 175 mm
Cutting wheel holder – diameter: 1¼ inches
Cutting wheel holder – taper in the shaping spindle: hollow steep taper PKP 45 – Bauer
Travel paths
Radial (X-axis): 230 mm
Manual transverse displacement of the column (Y-axis): ± 25 mm
Adjustment range of the axial slide (Z-axis): 150 mm
Workpiece table
Outer diameter: 168.14 mm
Bore: 65.532 mm
Push-on spindle
Maximum stroke length (V-axis): 30 mm
Adjustment range of the spindle axis: ± 0.25°
MACHINE DETAILS
Length: 6,435 mm
Width: 4,560 mm
Height: 4,400 mm
Weight: approx. 11,000 kg
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A18970811
- Nombor rujukan:
- AUC-2504099
- Kemas kini:
- terakhir pada 17.04.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Leipzig GLEASON- PFAUTERGP 130S
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.