Mesin mengasah gearGleason-Hurth
ZHF 150
Data mesin
- Nama mesin:
- Mesin mengasah gear
- pengeluar:
- Gleason-Hurth
- Model:
- ZHF 150
- Nombor mesin:
- G0504
- tahun pembuatan:
- 2005
- Keadaan:
- sedia untuk digunakan (terpakai)
- fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Diameter benda kerja (maks.):
- 63 mm
- Jarak gerakan paksi Z:
- 105 mm
- Diameter luar:
- 275 mm
- Jarak antara pusat:
- 350 mm
- Sudut putaran paksi A (min.):
- -30 °
- Sudut putaran paksi A (maks.):
- 30 °
penyediaan
- Lokasi:
- Hessen, Jerman
– Jarak: lebih kurang 9,894 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€1,000.00 (wajib)
percuma
Penerangan
TECHNICAL DETAILS
Workpiece diameter: 63.5 mm
Center distance: 350 mm
Length of the clamping surface: 1,550 mm
Number of T-slots: 2
Width of T-slots: 18 mm
Distance between T-slots: 180 mm
Center height (tailstocks): 350 mm
Swivel range of the fine wheel head (U-axis): +30 / -30 °
Center distance tailstock/fine wheel: min. 120 mm / max. 225 mm
Input resolution (all NC axes): 0.001 mm / degree
Control: SIEMENS 840D
Feed carriage
Movement range (Z-axis travel): 105 mm
Input resolution: 0.001 mm
Tool
Outer diameter: 225 - 275 mm
Bore diameter: 160 mm
Width: 60 mm
Workpiece details
Outer diameter: 40 - 150 mm
Module: 1.25 - 4.0 mm
Max. tooth width: 45 mm
Speeds and feeds
Tool speed: max. 2,000 rpm
Feed rate Z-direction: up to 2 m/min
Feed speed X-direction: up to 2 m/min
Feed speed U-direction: up to 2 m/min
Feed speed V-direction: up to 2 m/min
C3 direction: max. 12 °/s
Servo drives
Tool drive C1: 27.0 Nm at 3,000 rpm
Workpiece drive C2: 27.0 Nm at 3,000 rpm
X-axis: 20.0 Nm at 3,000 rpm
Z-axis: 20.0 Nm at 3,000 rpm
U-axis: 6.0 Nm at 3,000 rpm
Portal vertical (V1 axis): 6.0 Nm at 3,000 rpm
Gripper rotation axis C3: 5.0 Nm at 3,000 rpm
Loading slide (X1 axis): 5.0 Nm at 3,000 rpm
Three-phase motors
Hydraulic motor: 1.5 kW at 1,410 rpm
Central lubrication: 0.07 kW at 2,700 rpm
Coolant pump: 4 kW at 2,840 rpm
Hydraulic equipment
Flow rate: 21 l/min
System pressure: 50 bar
Clamping pressure headstock: max. 35 bar
Clamping pressure tailstock: min. 20 bar / max. 35 bar
MACHINE DETAILS
Weight: 5,500 kg
Space requirement: 2,700 x 2,300 x 2,600 mm
Operating resources
Hydraulic fluid: HLP D 46
Hydraulic capacity: 100 l
Electrics
Operating voltage: 400 V
Control voltage: 24 V DC
Light voltage: 230 V AC
Frequency: 50 Hz
Power requirement: approx. 27 kVA
EQUIPMENT
- Central lubrication
- Coolant pump
- Capacitive distance system
- Automatic workpiece clamping
- Fine gear head with U-axis
- Machine with full hydraulic equipment
- Dialogue-guided operating terminal
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
pemindahan bank
Butiran tawaran
- ID iklan:
- A19203401
- Nombor rujukan:
- AUC-2505085
- kemas kini:
- terakhir pada 22.05.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Jerman GLEASON-HURTHZHF 150
Niedersachsen, Deutschland HURTH - GLEASONZSE 150 CNC
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.