Penjana gear pepenjuru

Gleason 175HC

Equipped with:

Fanuc 30ia Control
Hydraulic System
Coolant System
Chip Conveyor
Pneumatics
Lube System
Jib Crane
Change Gears
Mist Collector
Transformer
Work Light
Stack Light

Specifications:

Extreme Ratio: 10:1
Root Angle Range (B-Axis): -5 deg. TO 90 deg.
Equivalent Root Angle Range: -8 deg. to 90 deg.
(Equivalent refers to cradle type machine.)
Face Hobbing:
Examples of Maximum Gear Pitch Diameter
-35 Degree Spiral
Fjdozn Aymjpfx Aitspl
-152 mm TRI-AC Cutter w/13 Blade Groups
Max. Full Depth: 0.550"
Max. Face Width: 1.6"
Face Milling:
Examples of Maximum Gear Pitch Diameter
-35 Degree Spiral
-7.5" Diameter Cutter
Max. Full Depth: 0.625"
Max. Face Width: 1.6"
Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg.
Max. Vertical Travel (Y-Axis): -4" to 7"
Max. Horizontal Travel (X-Axis): -6" to 4"
Sliding Base Travel (Z-Axis): 2" to 12"
Machine Center to Work Spindle Face (Fixed): 4.5"
Tooth Number: 5 to 200 Inclusive
Cutting Diameters:
Conventional Face Milling: 1.1" to 7.5"
Helixact: 100mm to 200mm
Fine Pitch: 102mm to 152mm
Coarse Pitch: 152mm only
Speeds:
B-Axis--Swinging Base (Degrees per Second): 30deg./sec.
A-Axis--Work Spindle (Face Milling)(RPM): 0-75
A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375
C-Axis--Cutter Spindle (RPM): 30-500
X-Axis--Horizontal (Inches per Second): 4.92"/sec.
Y-Axis--Vertical (Inches per Second): 4.92"
Z-Axis--Sliding Base (Inches per Second): 4.92"/sec.
Work Spindle:
Diameter of Taper at Large End (#39 Taper): 3-29/32"
Taper per Foot: 39/64"
Depth of Taper: 3"
Floor Space: 95.75" x 63.5"
Height (less mist collector): 90.75"
Approx. Weight: 22,000 lbs