Pusat pusingan dan pengilangan CNC

Gildemeister Sprint 42 - linear inkl. Stangenlader

The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center featuring 6 linear axes and 2 C-axes. Direct drives enable high acceleration rates and precise machining operations. Both the main and sub spindles have been fitted with new bearings, and the machine has undergone a comprehensive overhaul.

The following components have recently been renewed:
- Drive motor of the driven tool 2 replaced
- Sub spindle newly fitted with bearings
- New door interlock switch installed

Spindles: Main and sub spindle each up to 6,500 rpm, main spindle bar capacity 42 mm, sub spindle 38 mm

Tool capacity: 26 stations, up to 11 powered tools; turret with Y-axis for milling and threading operations

Axes / travels:
Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm
Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm
Kdjdpfx Aeyvy I Tofrsi
Rapid traverse: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min
Control: FANUC 160i-TB with 15" DMG SlimLine panel

Including IEMCA Boss 545-E bar feeder

The IEMCA Boss 545-E bar feeder (type 32 LL, year 2007) is included in the scope of delivery and enables continuous material feed up to Ø 42 mm.
It operates on 400 V / 50 Hz and requires 6 bar air pressure; its own weight is approx. 860 kg.

Inspection & collection: On-site inspection is possible

If you are interested or have technical questions, please do not hesitate to contact us.

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.