Mesin EDM wayarGF Machining Solutions
CUT 2000
Data mesin
- Nama mesin:
- Mesin EDM wayar
- pengeluar:
- GF Machining Solutions
- Model:
- CUT 2000
- tahun pembuatan:
- 2013
- Keadaan:
- baik (terpakai)
- fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 20,791 h
Butiran teknikal
- Berat kepingan kerja (maks.):
- 450 kg
- Jarak gerakan paksi X:
- 350 mm
- Jarak perjalanan paksi-Y:
- 250 mm
- Jarak gerakan paksi Z:
- 256 mm
- Ketinggian benda kerja (maks.):
- 250 mm
- Lebar benda kerja (maks.):
- 550 mm
- Panjang benda kerja (maksimum):
- 750 mm
penyediaan
- Lokasi:
- Freiburg, Switzerland
– Jarak: lebih kurang 10,063 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€2,900.00 (wajib)
percuma
Penerangan
TECHNICAL DETAILS
Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm
Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged)
travel paths
Travels X/Y/Z axes: 350 / 250 / 256 mm
Travel range U/V axes: ±70 mm
Max. taper at height: 30° at 100 mm
positioning speeds
Manual positioning speed X/Y/Z/U/V axes: 2 m/min
Programmable positioning speed X/Y/Z/U/V axes: 3 m/min
remote control
Functions: Wire drive, work container, measuring cycles
Display resolution: 0.0001 mm
Jogger: electronic handwheel for X/Y/U/V/Z axes
control console
Display: TFT 15" XGA (1024 x 768)
Input elements: alphanumeric pushbuttons, keyboard/mouse
wire threading system
Threadable height: up to 250 mm
Threading nozzle diameter: 2 mm
Combined wire guide
Wire diameter: Standard 0.07 - 0.3 mm (Option: 0.05 mm)
V-Guide: cylindrical to 2°
Toroid Guide: 2° - 30°
wire drive
Wire spool: up to 25 kg
Wire tension: 0 - 25 N
Wire speed: 0 - 300 m/s
Wire guide: semi-automatic
Wire disposal: Schopper
work container
Access: automatic lowering tank
Clamping system: clamping support or universal clamping frame
Operating mode: water bath and/or coaxial flushing
Height adjustment: 0 - 250 mm automatic
flushing
Flushing pressure: 0.2 - 18 bar programmable
Flushing combination: coaxial/rinsing/suction
dielectric unit
Loading volume: 700 l
Pre-cleaning: 10 µS/cm
Water quality: 4 canisters with 8 filter cartridges
Deionization resin: 10 l
Water conductivity: 2 µS/cm automatic
Cooling system: water/heat exchanger
Temperature control: ±1 °C automatic
IPG generator
Generator: integrated
Average working current: 38 A
Feed control: servo-controlled/fixed feed
Cooling system: air/heat exchanger
Max. cutting speed, cylindrical: 300 mm²/min
Best roughness Ra: 0.1 µm
Average contour deviation Tkm: ± 1 µm (Tf 6 µm)
Vision 5 control
Control/operator interface: Vision 5
Operating system: Windows XP
Operating mode: Multiprocessor
Units of measurement: mm/inch
Instruction set: absolute/incremental
Smallest programmable step: 0.0001 mm
Max. command length: 15 digits with floating point
Max. path correction: 6 mm
MACHINE DETAILS
Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm
Distance from floor to clamping surface: 1,100 mm
Net weight: 2,800 kg
Operating hours:
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Pemprosesan pembayaran
- kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
pemindahan bank
Butiran tawaran
- ID iklan:
- A18363876
- Nombor rujukan:
- AUC-2501166
- kemas kini:
- terakhir pada 27.01.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.