Lif guntingGenie
GS4047
Data mesin
- Nama mesin:
- Lif gunting
- Pengeluar:
- Genie
- Model:
- GS4047
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Kapasiti muatan:
- 350 kg
- Panjang platform:
- 3,180 mm
- Lebar platform:
- 1,160 mm
- Berat keseluruhan:
- 3,221 kg
- Ketinggian kerja:
- 13,700 mm
penyediaan
- Lokasi:
- Bremen, Jerman
– Jarak: lebih kurang 9,856 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
TECHNICAL DETAILS
Working height: 13.70 m
Platform height: 11.70 m
Guardrail height: 1.10 m
Toe board height: 0.15 m
Platform height, retracted: 1.43 m
Platform length, external: 2.26 m
Platform length, extended: 3.18 m
Platform extension: 0.91 m
Platform width, external: 1.16 m
Height, retracted, foldable guardrail: 2.54 m
Height, retracted, guardrail folded down: 1.95 m
Length, retracted: 2.48 m
Length, with extended platform extension: 3.18 m
Width: 1.19 m
Wheelbase: 1.85 m
Ground clearance, middle: 0.10 m
Ground clearance, with deployed pothole protection: 19 mm
Load capacity: 350 kg
Load capacity, platform extension: 113 kg
Travel speed, retracted: 3.2 km/h
Travel speed, extended: 0.8 km/h
Gradeability, retracted: 25%
Turning radius, inside: 0 m
Turning radius, outside: 2.3 m
Lift/lower time: 71/41 s
Drive: Two-wheel front-wheel drive
Tire size: 38 × 13 × 28 cm / 15 × 5 × 11 in
Control: proportional
Brakes: Two-wheel rear axle, hydraulic-dynamic braking on front drive wheels, multi-disc brakes
MACHINE DETAILS
Drive system: 24 V, 300 Ah
Batteries: 4 × 12 V, 150 Ah
Hydraulic system tank capacity: 28.4 l
Noise/sound pressure level at ground: < 70 dBA
Noise/sound pressure level at platform: < 70 dBA
Vibration: < 2.5 m/s²
CE dead weight: 3,221 kg
EQUIPMENT
Foldable guardrail with platform
Full-height swing gate at guardrail
Smart Link™ control system
Recessed rear socket for charger
Platform control panel with battery charge indicator
Fully integrated diagnostics system
Power cable to platform
Anchor points for safety harnesses
Emergency lowering valve for manual platform descent
Emergency stop switch at platform and ground control station
Multi-disc rear axle brakes
Hydraulic-dynamic braking of front drive wheels
Device for manual brake release
Side-mounted swing-out battery and hydraulic component compartments
Pothole protection
Tilt angle sensor with audible alarm
Lowering alarm
Flashing warning beacon
Electronic horn
Hour meter
Telematics-ready connection
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 9 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A21673868
- Nombor rujukan:
- AUC-2603302
- Kemas kini:
- terakhir pada 08.04.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Bremen JLGX20J+
Bremen JLGE450AJ
Bremen JLGToucan 12E+
Bremen GenieZ34/22N
Bremen GenieGS1932
Bremen JLGToucan 10E-L
Sittard GenieGS 4047 | 2015
Łaziska Górne GenieGS 4047 / 14M
Sepanyol GenieGS4047
Schierling GenieGS 4047
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.