Mesin deburring kepingan logam

GECAM G 65 RX

neu
ca. 12 Wochen ab Auftrags
Italien
57900 €
1094.31 €
1
650 mm
0,5 - 170 mm
670 x 2200 mm
4000 m³/h
120 mm
6 bar
78 (+/-2) dB
22 kW
2600 mm
1350 mm
2100 mm
1125 kg
WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP
Machine made of stress-free welded steel construction for stable and rigid structure.
Work table with motorised height adjustment via 4 synchronised spindles.
Independent drive motors for each work group.
Hoods for extraction inside the machine, one per station.
Touch screen for
-Automatic star-delta connection of the main motors
- Analogue ammeter for each group
- Digital display for sheet thickness with decimal point tolerance
- Material thickness adjustment (+/- 0.1 mm)
- Machine condition monitoring with alarm messages

FEEDING SYSTEM

Robust steel structure, wear-resistant surface.
Vacuum conveyor belt on request
Variable feed speed via frequency converter 0.6 to 6.5 m/min.
Rubber conveyor belt, oil and temperature resistant
Automatic conveyor belt centring
Lateral guides to prevent the belt from lifting off.
Rubber pressure rollers in front and behind each station, oil and temperature resistant
Idle rollers at the front and rear table
INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM

1 . WORKING GROUP - R

Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating
Adjustable via eccentric shaft for working position and compensation of abrasive belt wear
Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop.
Abrasive belts and/or Scotch Brite can be used.
Motorised adjustment and electronic control of contact roll height.
Variable speed motor with automatic brake in case of emergency.
Pneumatic tensioning system for the abrasive belt.
Sanding belt centring system, with electronic photocell.
Oscillation adjustment in width and time.

Diameter of contact roller
mm
125
Bedpfx Agowiqukovowt

Positioning accuracy of the contact roller adjustment
mm
+/- 0,02
Grinding belt speed m/sek 3-18

Motor power kW 7,5

2. WORKING GROUP - X
2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise.
Transverse movement of the entire group (oscillating)
Quick change holder for brushes

Brush diameter
mm
115

Number of brushes
No
8

Oscillation stroke
mm
15

Rotation motor power
kW
2,2

Revs
1/min
1000

Oscillation motor power
kW
0,4

Grinding brush speed
m/sec
10,0

Optional accessories:

B Group - External barrel brush Ø 150 mm

with Scotch Brite Brush
€
5150,00

with Wire Brush 0,3 mm
€
6060,00

R GROUP - GRINDING BELT

Motor 11 kW
€
740,00

X GROUP - CUP BRUSHES

Motor with variable speed 5,5 kW 350/1100 incl.