Pusat pemesinan berterusan

Gannomat Protec 0571 A Clamex

GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools

In top condition

Base machine complete in standard configuration for drilling and grooving, including:
- Additional safety device via louver curtain
- Prerequisite for horizontal Lamello P-system milling
- Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools
Detailed technical data can be found in the data sheet for ProTec Type 0571

Machining unit with: PowerBlock with 21 spindles and 1 dado saw
- 13 vertical drilling spindles
Lredjzu A D Ejpfx Amtjr
- 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X
- 1 grooving unit in Y

Workpiece sizes and weights
- Workpiece width (X): min. 60 mm / max. 1000 mm
- Workpiece thickness (Z): min. 6 mm / max. 60 mm
- Workpiece length (Y): min. 250 mm in continuous mode
max. 5600 mm programmable workpiece length in software
- Workpiece weight: max. 75 kg
1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change,
motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation,
for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm
including options
1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm
1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm
1 Auxiliary stop 600 mm with integrated rollers for roller tables
1 SET OF TOOLS: Drill set for ProTec
1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz
1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine
with collet 462E up to shank diameter 25mm, HSK and cutter set
1 HSK mounting set
1 Mounting device HSK63F,
easiest operation with maximum user comfort thanks to roller clamping system,
no clamping or tightening required,
mounted on a stable base or workbench,
1 Hook wrench for HSK63F collet 462E,
1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm
1 Counterpressure device from above
1 Tool for vertical Lamello P-system milling

Machine in very good condition with many drills and tools included.

The machine can be viewed and demonstrated at our showroom.

Location: available from stock in 54634 Bitburg
- immediately available -

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.