Talian Penyepuhan Penyemperitan Perintis untuk Poliester

Fourne Barmag

PILOT EXTRUSION SPINNING LINE POLYESTER

MAIN PART WAS DESIGNED BY FOURNE IN 1997 FOR DSM TO MAKE TRIALS OF POLYESTER AND POLYAMIDES, MONO & MULTIFILAMENT.

>>

EXTRUDER DETAILS :

MANUFACTURER : FEP POLYMER
YOC : 1997

TYPE : EX 25 - 25 D
MAX. THROUGHPUT : CA. 7,0 KG/H (PA6), CA. 5,6 KG/H ( PP )
: CA. 8,2 KG/H ( PET )

NOMINAL SCREW DIA : 25 MM
SCREW LENGTH : 25 X D
SCREW GEOMETRY : SPECIAL 3-ZONE-SCREW

MIXING TORPEDO : CHANGEABLE ATTACHED TO SCREW END , CA 3 X D LONG

HEATING CAPACITY : CA. 3,2 KW / 4 ZONES

DRIVE : CA. 4,5 KW, AS- MOTOR MIT SCHNECKENGETRIEBE

ELECTRICALLY HEATED AND REGULATED TO MAX. 350 ° CELSIUS,
EQUIPPED WITH 3 TEMPERATURE CONTROL SENSORS, OVER-TEMPERATURE
MONITORING, WATER-COOLED FEED ZONE, REMOVABLE
ISOLATION AND BASIC FRAME, INCLUDING INERT GAS
IN THE INLET PIPE, EQUIPPED FOR THE SUBSEQUENT RECEPTION OF A
TORQUE CLUTCH ON THE GEARBOX END



>>>

SPINBEAM & MELT PIPE : ELECTRICALLY HEATED

SPINBEAM DESIGN : FOR 1 MONFIL OR 2 MULTIFILAMENT THREADLINES

SPINPUMPS : 1 = 2 X 2.4CC , 1 = 1 X 2.4 CC , 1 = 1 X 0.6 CC

SPINNERETTES : 42 / 59 / 72


>>>



QUENCH CABINET : FEP Polymertechnik Gmbh
YOC : 1995
TYPE : CROSSFLOW
Plant Nr. : 7.1396

>>>
Bdjdpfxszl Hz Nj Al Ieg

WINDER : BARMAG
TYPE : SW4S
Auftragsnr : 10/0428
YOC : 1988


>>>

DRAW – STAND : EDMUND ERDMANN GMBH
TYPE : DRAWMOD 02/380-3/5/6 LM
YOC : 1995
COM. NR : 13/2492

CONTROLS COMPUTER : EDMUND ERDMANN
YOC : 1995
FABR. NR : 132492


>>>

PREHEATING OVEN : HERAEAUS Gmbh
Type : WU6100 , 500C , 3 Nipe, 400 V 11.4 A, 5.4 kW
YOC : 1997
FABR. NR : 97/11055


>>>

HOIST IN EXTRUDER AREA : HEBEZEUGFABRIK GMBH,
YOC : 1998,
CAPACITY : 0,7 TONS
LIFTING HEIGHT : 0,8 M