Mesin laminasiFoliant
Vega 400A Laminator
Mesin laminasi
Foliant
Vega 400A Laminator
Tahun pembuatan
2017
Keadaan
Terpakai
Lokasi
Wakefield 

Gambar menunjukkan
Tunjukkan peta
Data mesin
- Nama mesin:
- Mesin laminasi
- Pengeluar:
- Foliant
- Model:
- Vega 400A Laminator
- Tahun pembuatan:
- 2017
- Keadaan:
- sangat baik (terpakai)
Harga & Lokasi
- Lokasi:
- Unit 1A Thornes Lane Wharf, WF1 5RF Wakefield, United Kingdom

Hubungi
Butiran tawaran
- ID iklan:
- A20812267
- Nombor rujukan:
- 11050
- Kemas kini:
- terakhir pada 22.12.2025
Penerangan
Ref:11050 . 2017 Foliant Vega 400A Laminator.
New generation, very compact, single sided thermal laminator designed for heavy-duty digital outputs.
Equipped with:
Integrated deep pile vacuum feeder and a high-speed bump separator
Non-sticky pressure roller and in-run adjustable twin decurl bar and overlap system.
Pneumatic high-pressure system (with integrated compressor inside machine frame)
Suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B3+ lamination too.
The machine maximum speed is up to 18 m/min while performance is over 2100 sheets per hour of B3 portrait (white paper 200 gsm).
Feeder:
Equipped with a rising pile front separation stream feeder and with a vacuum belt head.
Built-in Becker vacuum pump is used for sheets front airing and feeding head vacuum.
Overlaps are controlled, in an ‘in-run’ mode.
Accuracy is +/- 2 mm under-lap (in a constant speed).
Fitted with a lifting plate and its capacity is a 28 cm pile of paper.
Laminator:
Maximum sheet size is 38 x 66 cm (which is the maximum outputs format from Xerox iGen4).
The minimum sheet size is 20 x 30 cm.
Compressor is integrated inside the machine frame as standard.
Laminating unit is equipped with an adjustable twin decurl unit:
• With a decurl blade for offset printed sheets decurling
• With a decurl roller for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks).
Roll of a film is mounted on a quick-changed shaft with a film tension control breaker.
Shaft capacity is up to 3000 m of the 24 - 42 microns film.
Film holder unit is equipped with an in-line trim slitter and a perforating wheel.
2 x laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller with non-sticky surface.
Pressure is pneumatically adjustable.
Laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor.
Warming up time is shorter than 10 minutes.
Controlled by an interactive, easy understandable icon based touch screen
System includes many automation items for an easy control of the machine and a reliable lamination.
Separator:
Integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers.
Separated sheets are delivered into a vibrating jogger
Laminating Films:
BOPP films (24 – 42 microns)
Ltsdpfox Nftnsx Agpea
Nylon films (24 - 35 microns)
Specification:
Maximal Speed: single side 18 m/min.
Feeding System: Automatic, vacuum belt, Feeder's Capacity 28 cm
Overlaps: In-Run Screw control, Overlaps Accuracy ± 2 mm
Paper Weight: 115–500 g/m²
Main Roller Pressure System: Pneumatic
Minimal Sheets Size (w×l): 20×30 cm
Maximal Sheets Size (w×l): 38x66 cm
Maximal Performance: 2100 B3 / hod.
Temperature Control: 80–140 °C, Warming Up Time 8 min
Power Supply: 230 V AC, 50-60 Hz
Power: 3150 W
Mechanical Parameters: Floorspace (w×l) 82×198 cm, Weight: 370 kg
New generation, very compact, single sided thermal laminator designed for heavy-duty digital outputs.
Equipped with:
Integrated deep pile vacuum feeder and a high-speed bump separator
Non-sticky pressure roller and in-run adjustable twin decurl bar and overlap system.
Pneumatic high-pressure system (with integrated compressor inside machine frame)
Suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B3+ lamination too.
The machine maximum speed is up to 18 m/min while performance is over 2100 sheets per hour of B3 portrait (white paper 200 gsm).
Feeder:
Equipped with a rising pile front separation stream feeder and with a vacuum belt head.
Built-in Becker vacuum pump is used for sheets front airing and feeding head vacuum.
Overlaps are controlled, in an ‘in-run’ mode.
Accuracy is +/- 2 mm under-lap (in a constant speed).
Fitted with a lifting plate and its capacity is a 28 cm pile of paper.
Laminator:
Maximum sheet size is 38 x 66 cm (which is the maximum outputs format from Xerox iGen4).
The minimum sheet size is 20 x 30 cm.
Compressor is integrated inside the machine frame as standard.
Laminating unit is equipped with an adjustable twin decurl unit:
• With a decurl blade for offset printed sheets decurling
• With a decurl roller for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks).
Roll of a film is mounted on a quick-changed shaft with a film tension control breaker.
Shaft capacity is up to 3000 m of the 24 - 42 microns film.
Film holder unit is equipped with an in-line trim slitter and a perforating wheel.
2 x laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller with non-sticky surface.
Pressure is pneumatically adjustable.
Laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor.
Warming up time is shorter than 10 minutes.
Controlled by an interactive, easy understandable icon based touch screen
System includes many automation items for an easy control of the machine and a reliable lamination.
Separator:
Integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers.
Separated sheets are delivered into a vibrating jogger
Laminating Films:
BOPP films (24 – 42 microns)
Ltsdpfox Nftnsx Agpea
Nylon films (24 - 35 microns)
Specification:
Maximal Speed: single side 18 m/min.
Feeding System: Automatic, vacuum belt, Feeder's Capacity 28 cm
Overlaps: In-Run Screw control, Overlaps Accuracy ± 2 mm
Paper Weight: 115–500 g/m²
Main Roller Pressure System: Pneumatic
Minimal Sheets Size (w×l): 20×30 cm
Maximal Sheets Size (w×l): 38x66 cm
Maximal Performance: 2100 B3 / hod.
Temperature Control: 80–140 °C, Warming Up Time 8 min
Power Supply: 230 V AC, 50-60 Hz
Power: 3150 W
Mechanical Parameters: Floorspace (w×l) 82×198 cm, Weight: 370 kg
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2021
Hantar permintaan
Telefon & Faks
+44 1924 ... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Iklan kecil
Öpfingen
9,829 km
Pemusing cerucuk
PolarPW-1
PolarPW-1
Iklan kecil
Emskirchen
9,753 km
Mesin pengedap Kerajang Separa Automatik
ROBOPACARIANE 5040 2TM
ROBOPACARIANE 5040 2TM
Iklan kecil
Bagsværd
9,601 km
Heidelberg Stahlfolder Ti 52 /6. Fi52.1
Heidelberg StahlfolderTi 52 /6 . Fi52.1
Heidelberg StahlfolderTi 52 /6 . Fi52.1
Iklan kecil
Itali
9,884 km
Mesin lentur
MorganaDigifold Pro
MorganaDigifold Pro
Iklan kecil
Norderstedt
9,769 km
Mesin jilid Wire-O, separa automatik
RenzRSB 360
RenzRSB 360
Iklan kecil
Dresden
9,538 km
Mesin lipat
HorizonAFC-566-F
HorizonAFC-566-F
Iklan kecil
Neuhausen
9,902 km
Mesin gam folder
ETERNA (Bobst)EFOLD 1100 ELITE
ETERNA (Bobst)EFOLD 1100 ELITE
Iklan kecil
München
9,699 km
PITNEY BOWES DI425
Pitney BowesDI425
Pitney BowesDI425
Iklan kecil
Lauda-Königshofen
9,825 km
Mesin pemotong kertas
Polar80 ECO
Polar80 ECO
Iklan kecil
Dollern
9,802 km
Mesin pemotong
POLAR66
POLAR66
Iklan anda telah berjaya dipadamkan
Berlaku ralat
































































