Flatbed / terpalFliegl
SDS 390 RoadRunner
Flatbed / terpal
Fliegl
SDS 390 RoadRunner
EXW harga tetap ditambah cukai perkhidmatan
€9,900
Tahun pembuatan
2015
Keadaan
Terpakai
Lokasi
Triptis 

Gambar menunjukkan
Tunjukkan peta
Data mesin
- Nama mesin:
- Flatbed / terpal
- Pengeluar:
- Fliegl
- Model:
- SDS 390 RoadRunner
- Nombor mesin:
- WFDFLT33902017848
- Tahun pembuatan:
- 2015
- Keadaan:
- terpakai
- Fungsi:
- berfungsi sepenuhnya
Harga & Lokasi
EXW harga tetap ditambah cukai perkhidmatan
€9,900
- Lokasi:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

Hubungi
Butiran teknikal
- Berat kosong:
- 6,537 kg
- Berat muatan maksimum:
- 28,463 kg
- Berat keseluruhan:
- 35,000 kg
- Konfigurasi gandar:
- 3 gandar
- Pendaftaran pertama:
- 10/2015
- Panjang ruang kargo:
- 13,650 mm
- Lebar ruang kargo:
- 2,480 mm
- Ketinggian ruang muatan:
- 2,790 mm
- Saiz tayar:
- 385/65 r22.5
- Warna:
- perak
Butiran tawaran
- ID iklan:
- A9058631
- Nombor rujukan:
- 37357
- Kemas kini:
- terakhir pada 06.05.2025
Penerangan
Further information
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Njdpfokyrmiox Agpjwr
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Njdpfokyrmiox Agpjwr
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Hantar permintaan
Telefon & Faks
+49 36482... iklan
Iklan anda telah berjaya dipadamkan
Berlaku ralat










