Semi treler dengan katil rata & terpalFLIEGL
SDS 390 Gardine Standard Ultralight Coil
Semi treler dengan katil rata & terpal
FLIEGL
SDS 390 Gardine Standard Ultralight Coil
EXW harga tetap ditambah cukai perkhidmatan
€25,990
Tahun pembuatan
2021
Keadaan
Terpakai
Lokasi
Triptis 

Gambar menunjukkan
Tunjukkan peta
Data mesin
- Nama mesin:
- Semi treler dengan katil rata & terpal
- Pengeluar:
- FLIEGL
- Nombor mesin:
- WFDFLT33902029406
- Tahun pembuatan:
- 2021
- Keadaan:
- hampir baru (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Harga & Lokasi
EXW harga tetap ditambah cukai perkhidmatan
€25,990
- Lokasi:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

Hubungi
Butiran teknikal
- Berat kosong:
- 5,800 kg
- Berat muatan maksimum:
- 29,200 kg
- Berat keseluruhan:
- 35,000 kg
- Konfigurasi gandar:
- 3 gandar
- Pendaftaran pertama:
- 12/2021
- Panjang ruang kargo:
- 13,650 mm
- Lebar ruang kargo:
- 2,480 mm
- Ketinggian ruang muatan:
- 2,790 mm
- Penggantungan:
- udara
- Saiz tayar:
- 385/65 R22.5"
- Warna:
- perak
Butiran tawaran
- ID iklan:
- A19083991
- Nombor rujukan:
- 59340
- Kemas kini:
- terakhir pada 06.05.2025
Penerangan
The images are archived; the vehicle may still be in use!
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
Nwodpfx Aowhp A Dsgpjr
without lift axle
These images are archive images; the vehicle may still be in use!
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
Nwodpfx Aowhp A Dsgpjr
without lift axle
These images are archive images; the vehicle may still be in use!
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Hantar permintaan
Telefon & Faks
+49 36482... iklan
Iklan anda telah berjaya dipadamkan
Berlaku ralat








