Treler separuh rendahFliegl
SDS 390, Nachlauflenkung, 2x VORHANDEN!
Treler separuh rendah
Fliegl
SDS 390, Nachlauflenkung, 2x VORHANDEN!
harga tetap ditambah cukai perkhidmatan
€24,900
Keadaan
Terpakai
Lokasi
Bovenden 

Gambar menunjukkan
Tunjukkan peta
Data mesin
Harga & Lokasi
harga tetap ditambah cukai perkhidmatan
€24,900
- Lokasi penjual:
- Alte Bundesstraße 48, 37120 Bovenden, Jerman

Hubungi
Butiran teknikal
- Berat kosong:
- 6,990 kg
- Berat muatan maksimum:
- 28,010 kg
- Berat keseluruhan:
- 35,000 kg
- Konfigurasi gandar:
- 3 gandar
- Pendaftaran pertama:
- 01/2021
- Pemeriksaan berikutnya (TÜV):
- 12/2026
- Panjang ruang kargo:
- 10,000 mm
- Lebar ruang kargo:
- 2,500 mm
- Ketinggian ruang muatan:
- 1 mm
- Penggantungan:
- udara
- Saiz tayar:
- 235/75R17.5
- Warna:
- putih
- Perbatuan:
- 1,001 km
- Jenis gearing:
- lain
- Kabin pemandu:
- lain
- Peralatan:
- ABS
Butiran tawaran
- ID iklan:
- A20750407
- Nombor rujukan:
- 89056
- Kemas kini:
- terakhir pada 09.03.2026
Penerangan
Vehicle location: Bovenden. 3 axles, air suspension, rear axle steered, ABS (anti-lock braking system), lashing eyes, underrun protection, support legs, storage box.
Body: 2 units available!
Overall length approx.: 13,800 mm
Maximum overall width: 2,550 mm
Overall height approx.: 2,488 mm
Gooseneck length approx.: 4,050 mm
Low-bed length approx.: 9,600 mm
Loaded bed height in low-bed approx.: 900 mm
Internal width approx.: 2,480 mm
Fifth wheel height approx.: 1,150 mm
King pin mounting dimension approx.: 1,680 mm
Front corner dimension approx.: 2,040 mm
Dodjx Hkciopfx Ahvjup
High-strength fine-grain steel welded construction in reinforced design, fifth wheel plate with replaceable 2" king pin, slightly inclined outer frame with 'Load-Lock profile' for attaching lashing straps, 8 pairs of additional lashing eyes integrated into the outer frame, each rated to 5t.
1x plug-in balancing support (3-piece) on the low bed deck, top wooden cross support at least 200 mm wide for height compensation; gooseneck insertable in 3 positions with parking position at the kink. 4 pairs of stanchion pockets (83 x 83 mm) integrated into the floor for inserting the balancing support; compartment for removable stanchions open, located under the loading floor.
13 pairs of stanchion pockets (70 x 40 mm internal) recessed into the outer frame (3 pairs on gooseneck and 10 pairs on low-bed area); 3 rows of stanchion pockets in the floor, each with 7 pockets (70 x 40 mm internal); 26 removable stanchions (80 mm wide / 50 mm deep / 1,200 mm long), hot-dip galvanized. Hardwood floor approx. 30 mm thick, longitudinally laid with omega profiles for high point load capacity in the wheel arch area; steel/chequer plate floor. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to prior sale, errors and change!
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Body: 2 units available!
Overall length approx.: 13,800 mm
Maximum overall width: 2,550 mm
Overall height approx.: 2,488 mm
Gooseneck length approx.: 4,050 mm
Low-bed length approx.: 9,600 mm
Loaded bed height in low-bed approx.: 900 mm
Internal width approx.: 2,480 mm
Fifth wheel height approx.: 1,150 mm
King pin mounting dimension approx.: 1,680 mm
Front corner dimension approx.: 2,040 mm
Dodjx Hkciopfx Ahvjup
High-strength fine-grain steel welded construction in reinforced design, fifth wheel plate with replaceable 2" king pin, slightly inclined outer frame with 'Load-Lock profile' for attaching lashing straps, 8 pairs of additional lashing eyes integrated into the outer frame, each rated to 5t.
1x plug-in balancing support (3-piece) on the low bed deck, top wooden cross support at least 200 mm wide for height compensation; gooseneck insertable in 3 positions with parking position at the kink. 4 pairs of stanchion pockets (83 x 83 mm) integrated into the floor for inserting the balancing support; compartment for removable stanchions open, located under the loading floor.
13 pairs of stanchion pockets (70 x 40 mm internal) recessed into the outer frame (3 pairs on gooseneck and 10 pairs on low-bed area); 3 rows of stanchion pockets in the floor, each with 7 pockets (70 x 40 mm internal); 26 removable stanchions (80 mm wide / 50 mm deep / 1,200 mm long), hot-dip galvanized. Hardwood floor approx. 30 mm thick, longitudinally laid with omega profiles for high point load capacity in the wheel arch area; steel/chequer plate floor. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to prior sale, errors and change!
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2002
2,313 Iklan dalam talian
Hantar permintaan
Telefon & Faks
+49 551 8... iklan
Iklan anda telah berjaya dipadamkan
Berlaku ralat


























