Treler separa terbuka
Fliegl SDS 350 Mega

EXW Harga tetap ditambah cukai perkhidmatan
€10,500
Keadaan
Terpakai (berfungsi sepenuhnya)
Lokasi
Triptis Jerman
Treler separa terbuka Fliegl SDS 350 Mega
Treler separa terbuka Fliegl SDS 350 Mega
Treler separa terbuka Fliegl SDS 350 Mega
Treler separa terbuka Fliegl SDS 350 Mega
Treler separa terbuka Fliegl SDS 350 Mega
Treler separa terbuka Fliegl SDS 350 Mega
more Images
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega

Data asas

Nama mesin:
Treler separa terbuka
Pengeluar:
Fliegl
Model:
SDS 350 Mega
Nombor mesin:
WFDFLT23002024348
Keadaan:
terpakai
Fungsi:
berfungsi sepenuhnya

Harga & Lokasi

EXW Harga tetap ditambah cukai perkhidmatan
€10,500
Lokasi:
Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Jerman
Hubungi

Butiran teknikal

Dimensi dan berat

Berat keseluruhan:
39,000 kg
Berat kosong:
5,865 kg
Berat muatan maksimum:
33,135 kg
Jumlah panjang:
13,850 mm
Lebar keseluruhan:
2,550 mm
Jumlah ketinggian:
1,820 mm

Gandar dan roda

Konfigurasi gandar:
3 gandar
Penggantungan:
udara
Saiz tayar:
435/50 R19,5"
Keadaan tayar:
49 peratus

Dokumentasi dan pensijilan

Pemeriksaan berikutnya (TÜV):
04/2027

Maklumat lanjut

Pendaftaran pertama:
12/2018

Butiran tawaran

ID iklan:
A23358848
Nombor rujukan:
49397
Kemas kini:
terakhir pada 19.11.2026

Penerangan

# Chassis / Frame
- Welded fine-grain steel construction, fifth wheel plate with replaceable 2" kingpin.
- Full-width rear ramp attachment rail for aluminium ramps. Suitable for loading construction machinery up to 8,000 kg gross weight and 2,500 mm width. Loading ramps must only be used with rear stabilisers deployed!
- Slightly angled outer frame with Load-Lock profile for lashing strap attachment. With side boards fitted, the side boards must be opened to attach straps.
- 24-tonne, 2-speed landing gear, single-side operation, straight lower section, without thrust compensation.
- Folding rear stabilisers, wheel chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection.
- Quarter-shell mudguards in front of the 1st axle and behind each axle, anti-spray flaps behind each axle.
- Spare wheel carrier for 1 spare wheel incl. mounting kit; spare wheel matching the standard tyres, steel rim.
# Axles and Suspension
- SAF disc brake axles, laser-aligned axles and chassis to reduce tyre wear and fuel consumption.
- Air suspension.
- 1st axle automatic lift axle incl. forced lowering and traction assistance, activated by braking 3 times. Traction assistance operates with up to 30% axle load exceedance and max. 25 km/h.
- Lift axle operated below the recommended ride height; no warranty for tyre damage.
# Braking System
- 2-line compressed air braking system, spring-loaded parking brake.
- 2 front fail-safe coupling heads, without connecting lines.
- EBS electronic braking system with front EBS socket, without connecting cable.
- Towing vehicle must ensure ABS functionality!
- Raise/lower valve.
- Ride height with lift axle; raising the lift axle increases loading/overall height by 50 mm (Mega Flex only at low ride or coupling height).
- Vehicle stability system.
# Wheels and Tyres
- 435/50 R19.5 tyres, make selected by manufacturer.
- Steel rims, factory silver.
# Electrical System
- 24 V, multi-chamber lights, yellow LED side lighting.
- 2 white front position lights.
- 2 white/red rear outline marker lights.
- 1 x 15-pin socket at front, without connecting cable.
Itjde Ak Npaepfx Adlep
# Floor
- Approx. 30 mm plywood panels with Omega inserts at cross joints, supported by 8 longitudinal beams for high point loads; forklift axle load up to max. 7,900 kg.
- Premium floor sealing, sealed around the entire perimeter.
- Note: floor deformation due to weather conditions possible!
# Front Bulkhead / Front Corner Posts
- 25 mm aluminium hollow profile, 700 mm high; steel corner posts in volumetric design.
- Crash-Blocker, internal steel impact protection approx. 140 mm high at the bottom.
# Operation / Approval
- Special permit required for gross combination weight exceeding 40 t.
- Exemption required for 9,000 kg axle load. Observe country-specific approval regulations.
- CZ registration, EC type approval according to 2007/46, 24/7 service hotline.
- Prepared for single-line number plate holder, warning board according to ECE 70.
- Reflective contour markings according to ECE R048, white on sides and red at rear.
# Finish
- Frame hot-dip galvanised incl. passivation, landing legs black coated, front corner posts hot-dip galvanised, aluminium front bulkhead.

Pembekal

Didaftarkan sejak: 2006

198 Iklan dalam talian

Hubungi

Hantar permintaan

Tanahus 
Jerman
Austria
Switzerland
Amerika Syarikat
United Kingdom
Perancis
Belgium
Sepanyol
Meksiko
Itali
Belanda
Poland
Persekutuan Rusia
Belarus (Republik Belarus)
Ukraina
Estonia
Turki
New Zealand
Ireland
Republik Czech
Denmark
Finland
Sweden
Norweg
Luksemburg
Yunani
Lithuania
Latvia
Iceland
Portugal
Brazil
Venezuela
Argentina
Hungary
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Kroasia
Bulgaria
Makedonia Utara
Bosnia dan Herzegovina
Israel
Mesir
Maghribi
India
Indonesia
Korea Selatan
Jepun
Thailand
Malaysia
Vietnam
China, Republik Rakyat
Taiwan
Iran
Bangladesh
Nota: Permintaan anda akan dihantar kepada semua penjual dalam kategori mesin. Dengan cara ini, anda boleh menerima banyak tawaran.
Permintaan tidak dapat dihantar. Sila cuba lagi kemudian.

Telefon & Faks

+49 36482... iklan